Votes - 1, Average rating: 4
(
)
)
|
manual abstract
Up to 150 lbs (68kg) of ice storage. Standard equipment includes 6" to 9" (153 to 229mm) adjustable legs for undercounter dispenser support. Dispensers are auto-fill ready to accept (2) Follett Satellite-fill™ Chewblet® icemakers, for drop-in or slide-in installations. Attractive, low-profile design • Compact dispenser with undercounter storage extends only 22" (559mm) above counter • 12" (305mm) wide tower dispenses both ice and chilled water • Allows use in islands without restricting visibility • Contemporary graphics and neutral colors blend into any decor • Fits into ADA-compliant 34" (864mm) counter Faster, safer loading of ice at waist height • Safe, easy waist-height loading from front or rear • Eliminates overhead lifting of buckets or loading from ladders • Allows quick reloading during serving period with minimum disruption Added flexibility to meet varied needs • Reliably dispenses Follett’s Chewblet ice and most cubelet ice up to 1" (26mm) square • Choice of push-button or lever ice and water actuation Pre-configured for Follett Satellite-fill Chewblet icemakers • Add one or two icemakers for added labor savings and sanitation • Consumer-preferred, chewable compressed nugget ice • Slow melting, maintains drink temperature Accessories • Ice Manager integration kit (item# VUIMDVKIT) 801 Church Lane • Easton, PA 18040, USA Toll free (800) 523-9361 • (610) 252-7301 © Follett Corporation Form #2790 Fax (610) 250-0696 • 115V only 115V only Vision™ ice and water dispensers VU155N Series Vision™ ice and water dispensers VU155N Series (696mm) 12" (305mm) 25.8" (656mm) 18.5" (470mm) 3.5" (889mm) bin signal power air break* Left Side 3/4 PVC drain pan drain 3/8 water inlet 3/4 PVC slip joint 23.50" drain (597mm) 6" (153mm) Front View – Right hand ice and water chutes (shown with two HCC1000AVS Satellite-fill Chewblet icemakers) PVC joint drain slip 3/4" air break* electrical connections counter top *DO NOT CONNECT AIR BREAK TO DRAIN SYSTEM 12" (305mm) 1" min. (26mm) 12" min. (305mm) 31.25" (794mm) 21.75" (553mm) 49.75" (1264mm) 28" (712mm) 26.63" (677mm) Plug Configuration (115V only) NEMA 5-15 Refer to Design Detail Sheets for important icemaker and installation information Icemaker series Literature form# MCD400 2810 HCC1000 3105 HCD1000 3110 HCC1400 3175 HCD1400 3110 Connections/Installation • Support all dispensers from below on channels or with supplied leg accessory • Removable counter panel required for access to dispenser side opposite ice chute • 3/4" PVC pipe nipple for bin drain and drain pan drain, 1" ID hose for beverage bath drain (do not tie drains together) • Drawings show units with right hand ice chute – left hand units have connections in same position on right side Required Clearances • 51" (1295mm) minimum above counter for installation if dispenser will be dropped into counter • 36" (915mm) minimum above counter for auger removal • 12" (305mm) minimum on side opposite ice chute for service • 12" (305mm) minimum on ice chute side if ice transport tube enters this side • 12" (305mm) minimum between dispenser side(s) and optional icemaker(s) • Maximum counter thickness – 1.25" (31.75mm) Electrical Standard electrical – 115V, 60Hz, 1 ph Dispenser – 2.4 amps Alternate electrical – 220V, 60Hz, 1 ph Dispenser – 2.0 amps 8 ft (2.4m) cord and NEMA 5-15 hospital-grade plug provided with each dispenser. Separate circuits and disconnects required for each dispenser. Approximate Shipping Weight Dispenser – 250 lbs (113kg) Chewblet is a registered trademark of Follett Corporation, registered in the US. Follett reserves the right to change specifications at any time without obligation. Certifications may vary depending on country of origin. 801 Church Lane • Easton, PA 18040, USA © Follett Corporation Toll free (800) 523-9361 • (610) 252-7301 Form #2790 05/07 Fax (610) 250-0696 • 115V only 115V only ...