Votes - 4, Average rating: 4.5 ( )

Manafacture: Miele File size: 1.81 mb File name: KWT1601Vi_us.pdf Language of manual:

. Consult with your municipal policy on recycling. . Be careful not to damage any part of the pipework while awaiting disposal by: -puncturing the refrigerant channels in the evaporator. -bending any pipework. -scratching the surface coating. Splashes of refrigerant can damage the eyes. . Your old refrigerator may have a cooling system that used CFCs (chlorofluorocarbons). CFCs are believed to harm stratospheric ozone. If you intentionally release this CFC refrigerant, you can be subject to fines and imprisonment under provisions of environmental legislation. Make sure the CFC refrigerant is removed and disposed of by a qualified technician. SAVE THESE INSTRUCTIONS Guide to the wine storage unit . Circulation fans / Active charcoal filter . Wooden racks . Insulation panel to separate the upper and middle temperature zones . Bottle display rack . Control panel / Insulation panel to separate the middle and lower temperature zones . Main switch to turn the appliance On/Off . Glass door with UV filter . Connection (behind the ventilation gap) for the Home Security System (HSS) Guide to the wine storage unit Control panel . Access button . Upper temperature zone . Middle temperature zone . Lower temperature zone . Temperature display: Allows you to set the temperature (. colder; . warmer) and set the duration of the display lighting (. shorter; . longer) . Long-term wine storage . Short-term storage of white wine at a moderate temperature . Short-term storage of red wine at a moderate temperature . On/Off sensor button for the display lighting . Off sensor button for the temperature and/or door alarm* * only visibly when the relevant function is activated Before use Before using for the first time . Clean the inside of the appliance and the accessories with a mild solution of warm water and liquid dish soap. Dry with a soft cloth. If the appliance was transported or laid horizontally for any reason, allow it to stand vertical for at least 8 hours before turning it on. Failure to do so will affect the functioning of the appliance. Turning the appliance On/Off . Open the appliance door. . Turn the appliance On/Off with the main switch. The main switch is located on the right-side underneath the control panel. All three zones are switched on or off together. Once on, the appliance begins cooling. When the door is open, the interior lights come on. The access button will light in the control panel. The preset temperatures (factory settings) are reached after a few hours. Turning off the appliance with the main switch does not safely isolate it from the power supply. Settings Using the settings This appliance is operated with the use of touch keys activated by a finger. – An available button will appear white. – A selected button will appear yellow.. . Touch the access button so it turns yellow. On the control panel you will now see the sensor buttons of the three temperature zones. The factory (default) settings for the temperature zones are as follows: – upper temperature zone: red temper. – middle temperature zone: white temper. – lower temperature zone: wine storage. . To turn the display lighting on or off when the door is closed, touch the "display light" sensor button. . To change the settings, touch the sensor button for the temperature zone you wish to set. The selected sensor button appears yellow. You can now select from the following settings for the selected zone(s) or change the pre-set temperature(s) as desired. For more information on setting the temperature see "Optimum temperature and air quality". Settings . To de-select a temperature zone touch the sensor button for that particular zone so that it turns white, or select another sensor button. . To leave the settings menu, touch the access button "" so it turns white. The last settings entered are stored. The sensor buttons for the three temperature zones disappear from the control panel. Even if you do not touch the access button, the electronics will switch back to normal after about 1 min. Custom settings In the custom settings mode you can select and change functions. The function possibilities are described in the respective chapters of this manual. Function Display text Temperature °C-°F † RemoteVision Module settings (optional accessory) . Button sound on/off . Exit Custom Settings mode . Humidity settings § Settings Turning the button sound On/Off If you prefer the buttons to be silent when touched, the button sound can be turned off. . Touch the access button ""soit turns yellow. . Touch the sensor button for any temperature zone so it turns yellow. . Note the position of the . button, but do not touch. . Touch the access button "" again so it turns white. Only the access button "" is visible. . Place one finger on the position of the . button and hold (the . button will not be visible). . While holding down the . button, press the access button "" once. Keep holding the . button down until the following appears in the display (approx. 5 s...

Download now

Please, enter two numbers from picture: