Votes - 3, Average rating: 4 ( )

Manafacture: Emerson File size: 262.16 kb File name: Language of manual:

ALWAYS UNPLUG THE UNIT FROM THE WALL PRIOR TO CLEANING THE FAN FILTER There are 2 effective methods to clean the external fan filter of your wine cooler: • A vacuum cleaner can be used collect the dirt, dust and hair that has built up • Alternatively compressed air in a container can be used to clean the fan filter of your wine cooler. Ensure to follow the directions of the compressed air container to avoid damage or personal injury. Interior Light Information: The interior light source of the wine cooler consist of LED lighting which is long lasting and very energy efficient. LED lights will usually last for many years, even sometimes lasting longer than the product they have been installed in. If for any reason the LED lights stop burning and you have determined that they do not longer work. Please contact our customer service department toll-free at 1-800-898-9020 to find the service center nearest you. -4- -3- Troubleshooting Guide: You can easily solve many common problems by trying the suggestions below: SYMPTOM POSSIBLE CAUSE Vibrations • Check to make sure the wine cooler is on a level surface The door will not close properly • The wine cooler is not on a level surface • The racks are out of position Fan is always running. • This is simply a function of the cooling system. The lower the setting, the more the fan will run. If the room is warmer than 77°F (25°C), it will run more • The unit has been designed to run continuously when operating at the lower temperatures Unit has no power. • Check the wall outlet for power. Make sure the outlet is not controlled by a wall switch The inside temperature does not seem correct • Make sure the cooling vents on each side of the cooler are not obstructed. Have at least 5 inch (15cm) of space on each side of unit. • The unit will have difficulty in cooling if the set temperature is 32°F (18°C) below the ambient temperature. Example: if the ambient temperature is 86°F (30°C), the unit will have difficulty cooling to 54°F (12°C). • When using the unit for the first time, it can take up to 24 hrs to reach the desired temperature The unit does not operate • It may not be plugged into the wall socket • Make sure the wall socket is functional by testing another electrical appliance in the power socket • Make sure the circuit breaker is not tripped or a fuse is blown There is a puddle of water under / around the wine cooler • This wine cooler features a self-evaporation system. An external drip tray is therefore not required for accumulating condensation. If water forms under / around the wine cooler, the humidity level in the room is too high. Either try to lower the humidity level in the room (using for example a dehumidifier) or place the wine cooler in an another room The unit will not cool. Power is On. Make sure there are at least 3-5 bottles in the unit. Allow at least 24 hours for the internal temperature to adjust properly. *Because of technological limitation , the interior temperature can be set between 44°F (7°C) and 66°F (19°C) on the control panel only at the room temperature of 77°F (25°C) To achieve accurate temperature control, the unit should not be used or operated in any of the following locations: • in a sunny place • in a room with poor air circulation such as a garage • near another heat producing appliance (dishwasher, oven, refrigerator). • with an outlet shared with a refrigerator as it will drain power from the unit. • built-in a wall recess, niche or cabinet. -5- • in a cabinet or closet. And remember to have at least 5 inch (15 cm) of space on each side of unit. General Statements • The unit can be manually set using the ^ and Ў buttons The minimum setting is 44°F (7°C) and maximum is 66°F (19°C). • The unit does not use any CFC’s. There is no compressor inside this unit. • The cooling system is called a Peltier System TECHNICAL SPECIFICATIONS: Volume (liter) 25L (0.88 CUFT ) Unit Dimension (W.H.D)(mm) 410.275.525 Gift Box Dimension (W.H.D)(mm) 470.330.565 Power Consumption (KW·h/24h) 0.8 (59°F) Maximum Temperature Variance (between ambient and cooler) 59°F * Temperature Control Range 44°F - 66°F* Rated Voltage AC 120V Rated Frequency 60HZ Input power 70W * Because of technological limitation , the interior temperature can be set between 44°F (7°C) and 66°F (19°C) on the control panel only at the room temperature of 77°F (25°C) -6- Circuit Diagram: -7- LIMITED WARRANTY What does this warranty cover? Any manufacturing defects in original material, including original parts and workmanship, under normal use and conditions. For how long? One year parts and labor from date of original purchase. What will we do? If you need service under this warranty, and you provide us with the dated proof of purchase, we will provide repair service at no charge for labor and parts at an authorized Depot Repair Facility, or replace the product in our discretion. How do you make your warranty claim? If it becomes necessary to repair your unit, you can obtain the...

Download now

Please, enter two numbers from picture: