Votes - 1, Average rating: 4 ( )

Manafacture: Sony File size: 3.92 mb File name: Language of manual:

Press OPTIONS, highlight and select Alternate Audio, and change the Alternate Audio language (see page 35). Audio noise • Make sure that the antenna is connected using a 75-ohm coaxial cable. • Keep the antenna cable away from other connecting cords. • To avoid TV interference, make sure to use an undamaged antenna cable. No Audio or Low Audio with • Press THEATER for BRAVIA Sync activated Theater System (see page 25). Home Theater System •Set Speakers to Audio System in the Sound settings (see page 34). •Set Audio Out to Fixed in the Sound settings (see page 35). BRAVIA Sync Cannot find connected • Make sure that the Control for HDMI is set up on both the TV and the optional BRAVIA Sync HDMI device device compatible with BRAVIA Sync (see page 25). Second A/V receiver is not • Only one A/V receiver may be used with the BRAVIA Sync and Control for listed on the Device List HDMI functions at one time (see page 41). PC Input No picture / No signal • Confirm the PC is correctly connected to the TV with either the PC IN (with an HD15 cable) or with the HDMI IN. • Ensure the output signal from the PC is one of the formats listed on page 14. • Turn the PC off. Confirm the PC connection and restart the PC. Plug-and-play will auto-detect the TV and correctly set up PC timing. •Verify PC Power Management is activated (see page 42). • Verify the PC is not in standby or hibernation mode. Poor Picture • Adjust the resolution (see page 14). •Adjust Pitch and Phase. General Wide Mode changes automatically • The current Wide Mode setting is automatically replaced with the 4:3 Default setting when you change the channel or video input, if 4:3 Default in the Screen settings is set to other than Off. If you want to lock in Wide Mode selected with WIDE on the remote control, set 4:3 Default to Off in the Screen settings (see page 35). • Check the Auto Wide option in the Screen settings (see page 35). Suddenly the picture gets • The picture gets smaller during the commercials due to the method in which the smaller provider broadcasts their content. When HD content channels switch to SD content (commercials), the picture may be small with a black border. • Auto Wide will not expand the picture during these content changes since the content information is regulated by the channel signal provider. You can manually change the Wide Mode if you prefer (see page 22). This setting will remain in effect until you change the channel or input or manually change the Wide Mode again. Condition Explanation/Solution “Black box” on screen • You have selected a text option and no text is available (see page 38). To turn off this feature, set the CC Display option to Off. If you were trying to select closed captioning, select CC1 instead of Text1-4. Black bands appear at the edges of the screen Certain programs on DVD or other digital sources display a loss of detail, especially during fast-motion or dark scenes • This is due to the digital compress...

Download now

Please, enter two numbers from picture: