Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  
downloaded: 88   File size: 696 kb   Manafacture: JVC  
Category: Dictaphones
@name

5 Repeat the same procedure to store other settings. To reset to the factory settings Repeat the same procedure and reassign the preset values listed in the table on page 10. 12 OTHER MAIN FUNCTIONS Setting the clock 2,3 12,3 4 Press and hold the button for more than 2 seconds. “CLOCK H,” “CLOCK M” or “AREA” appears on the display. 2 Set the hour. 1. Select “CLOCK H” if not shown on the display. 1. 2. 2. Adjust the hour. 3 1. Set the minute. 1. Select “CLOCK M.” 2. 2. Adjust the minute. Start th

downloaded: 6   File size: 2 mb   Manafacture: JVC  
Category: Dictaphones
@name

(SP mode only) When playing back tapes recorded in HDV or DVCAM format, the front panel HDV or DVCAM indicator is lit. .. Selecting playback video format Set whether to automatically detect the video format for playback, or to select a specific format, using PB TAPE FORMAT on the SYSTEM [2/2] Menu screen. [Settings: AUTO, DV, HDV, DVCAM] (Details: XPage 69) .. Setting IEEE1394 terminal output video format Set the IEEE1394 terminal output video format to HDV or DV. Set the IEEE1394 switch on the

downloaded: 1   File size: 2 mb   Manafacture: JVC  
Category: Dictaphones
@name

dial can also be used to select a preset. SET TAPE SPEED 5 2 Press SP/LP. Check the SP/LP indicator on the recorder display panel to confirm the selected tape speed. c Picture quality of LP recordings will not be as high as SP recordings. 1 2 4 5 3 6 8 0 7 9 2 1 3 TV PROG. SP/LP 4,53 PLAY RECORD4 STOP6 NUMBER2 START RECORDING Press and hold RECORD and PLAY on the remote control, or press RECORD on the recorder. B.E.S.T. takes place at the beginning of both the first SP and the first LP recording

downloaded: 6   File size: 455 kb   Manafacture: JVC  
Category: Dictaphones
@name

NOTES: When the channel is changed on the VCR; . The “STEREO” indication appears on the screen for about 5 seconds if the program is a stereo broadcast. . The “SAP” indication appears on the screen for about 5 seconds if the program is a SAP broadcast. . Both indications appear when a stereo program is accompanied by SAP sound. . AUDIO MONITOR — HI-FI/HI-FI L/HI-FI R/NORM/MIX This VCR can record two sound tracks simultaneously (normal and Hi-Fi) on a Hi-Fi stereo tape. You can select the sound t

downloaded: 6   File size: 2 mb   Manafacture: JVC  
Category: Dictaphones
@name

PLUSCODE NUMBER 123 PRESS NUMBER KEYS (0–9) THEN (OK) PRESS (PROG.) TO END Then; If the Guide Channel Set screen appears — go to step 4. If the VCR Plus+ Program screen appears — go to step 5. . To make corrections, press CANCEL and input the correct PlusCode number. EN35 4 4 Input receiving channel number The guide channel number, which is assigned to the TV or cable station for the PlusCode number that you entered in step 3, will appear automatically on the Guide Channel Set Up screen. Press t

downloaded: 3   File size: 696 kb   Manafacture: JVC  
Category: Dictaphones
@name

1 Press SEL (select) for more than 2 seconds. “CLOCK H,” “CLOCK M” or “AREA” appears on the display. 2 If “AREA” does not appear, press T or S until it appears. 3 Press +. “AREA EU” appears and the channel intervals are set to 9 kHz for AM and 50 kHz (for manual tuning) / 100 kHz (for searching) for FM. To reset to the factory setting, follow the above step 1 and 2, then press – in step 3 (“AREA US” appears on the display.) AREA EU: Select this when used in an area other than North and South Ame





Category