AC Power Connect the supplied power cord to the AC IN jack on the side of the recorder and connect the other end to a standard AC outlet. Do not force the connections, as they only fit one way. Plug the power cord into the AC IN jack before plugging it into the AC outlet, and unplug the power cord from the AC outlet before unplugging it from the AC IN jack. Vehicle Battery Power You can power the recorder from your vehicle’s cigarette- lighter socket using a 6V, 300mA DC adapter and a size B Ada

Slide to LOCK to lock the control buttons. Press RESET to return all settings to default values. 1. Slide the battery door latch to the left. 2. Slide down the battery door to remove it. Press REC/STOP to start or stop recording. Press MODE/INDEX to select the operation mode or to mark an index during recording or a section for repeating during playback. 3. Place two AAA batteries over the ribbon and into the battery compartment according to the polarity symbols (+ and –) marked inside. Replace

No. 276-1326 VOICE RECORD/PLAYBACK MODULE Your RadioShack Voice Record/Playback Module provides high-quality, record/playback for short (up to 20-second) messages. It uses the latest IC recording technology, and adds a microphone, speaker, two button switches, LED indicator, and a battery case for a complete, single-message record/playback system ready for installation in your own cabinet. You can record a new message as many times as you like without having to wait for a tape to rewind. Reco

. Voice Recorder . . 63-1137 . . Removing the Battery Insulation Strip To prevent battery drainage during shipping, your recorder is shipped with an insulation strip that you must remove before use. 1. Press and rotate the battery compartment cover counterclockwise to remove it. 2. Remove the insulation strip. 3. Replace the cover and rotate it clockwise to secure it. Recording a Message You can record a message up to 10 seconds long. The message remains saved even if the recor

Please read this user’s guide before installing, setting up, and using your new Recorder. Check package contents • Handheld Cassette Recorder • User’s Guide • Quick Start Contents Overview of Controls .........................................................................................4 Features..............................................................................................................6 Set up..................................................................................

14-1045reimage.fm Page 2 Friday, January 12, 2001 3:56 PM ¶ Contents Features ................................................... 3 A Quick Look at Your Recorder ............. 4 Preparation .............................................. 5 Connecting Power ............................. 5 Using Batteries .......................... 5 Using AC or DC Power .............. 6 Connecting an Earphone .................. 8 Operation ............................................... 10 Loading a Microcassette

4. Close the door. Operation RECORDING 1. Load a cassette. 2. Set SPEED on the side of the recorder as follows: • To double the cassette’s recording/ playback time, set SPEED to 1.2. This setting allows 120 minutes of total recording/playback time on an MC-60 tape, or 180 minutes on an MC-90 tape. • For better sound quality, set SPEED to 2.4. This setting allows 60 minutes of total recording/playback time on an MC-60 tape, or 90 minutes on an MC-90 tape. 3. Press REC to begin recording. Both REC