Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Tekniske data
Optagemedie:
Indbygget flash-hukommelse
Optagetid:
WS-200S: 128 MB
HQ: Ca. 4 timer 20 minutter
HQ:
Ca. 8 timer 50 minutter
SP:
Ca. 1 timer 25 minutter
LP:
Ca. 54 timer 50 minutter
WS-100: 64 MB
HQ:
Ca. 4 timer 20 minutter
SP:
Ca. 8 timer 40 minutter
LP:
Ca. 27 timer 20 minutter
Mikrofon:
Electret kondensatormikrofon (mono)
Højttaler:
Indbygget 16 mm rund dynamisk højttaler
Udgangseffekt:
100 mW
Hovedtelefonstik (stereo):
Diameter 3.5 mm, impedans 8 Ω
Mikrofonstik:
Diameter 3.5 mm, impedans 2 kΩ (WS-200S: stereo) (WS-100: mono)
Strømforsyning:
AAA (LR03 eller R03) batteri eller Ni-MH genopladeligt batteri
Batterilevetid (LP):
Alkalinebatteri: Ca. 13 timer, Ni-MH genopladeligt batteri: Ca. 12 timer
Størrelse:
94 (L) x 40 (B) x 15.1 (H) mm
Vægt:
WS-200S: 54 gr. (med batteri) WS-100: 54 gr. (med batteri)
• Batterilevetiden er målt af Olympus. Den kan variere meget afhængig af batteritype og brugsforhold.
• Dine optagelser er kun til personlig brug. Det er ikke tilladt at optage materiale der er ophavsretsligt beskyttet,
uden først at have fået de fornødne tilladelser af materialets indehavere.
• Ret til ændringer i tekniske data og design, uden varsel, forbeholdes.
Tilbehør (ekstra)
Lader til Ni-MH genopladeligt batteri: BU-400 (kun Europa)
Ni-MH genopladeligt batteri: BR401
Tilslutningskabel (hovedtelefonstik ↔ mikrofonstik): KA333
Stereomikrofon: ME51S (til WS-200S)
Støjundertrykkende monomikrofon: ME12
Electret kondensatormikrofon: ME15
Telefonpickup: TP7
USA RFI
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Canadian RFI
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio
Interference Regulations of the Canadian Department of Communications.
»CE« mærket viser at dette produkt overholder de Europæiske krav vedrørende sikkerhed, helbred, miljø samt
brugerbeskyttelse.
DK 37