Votes - , Average rating:
(
)
)
Manafacture: Yamaha
File size: 661.66 kb
File name:
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
Other manuals for this model:
manual abstract
* Battery life varies depending on the type and manufacturer of battery/microSD-card, storage conditions, usage, ambient temperature, etc. Yamaha will not guarantee operation if you use any battery other than an alkaline battery or a rechargeable battery specified by Yamaha (eneloop). About the ALC (Auto Level Control) function Auto Level Control function automatically adjusts the recording level in response to the source level so that the resulting recording will be dynamically tighter. ALC OFF ALC ON Feature The recording will accurately represent the original sound, with the sound dynamics maintained as is. The recording dynamics will be adjusted, with a higher level sound recorded slightly quieter and a lower level sound recorded slightly louder. This setting will reduce distortion and is better for dictation. Application Musical performance and nature recordings Musical practice, conference meeting and interview recordings Recording musical performance Before recording, set the [ALC] switch to [OFF] and the [MIC SENS] (microphone sensitivity) switch to [LOW]. POCKETRAK CX Owner’s Manual18 VOL HIGH LOWON OFFALC MIC SENS 1. Press the [FOLDER/A-B REPEAT] button located on the side panel repeatedly to select a folder into which to record. Hint: FOLDER · Pressing the [FOLDER/A-B REPEAT] button repeatedly will scroll through the folders. As an example, select one from folders A-D. Recording Recording Press the [REC/PAUSE ] button once again. The unit enters recording [STANDBY] mode. (Recording has not started yet.) level meter Note: · The level meter will move left or right in response to the sound level from the microphone. 3. Press the [T]/[Y] buttons to adjust the MIC LEVEL (recording level). Adjust the recording level while playing music, speaking, etc. Hint: Setting the recording peak limiter When the recording peak limiter is set to ON, the recorder reduces sound distortion by automatically adjusting excessive peaks. It is recommended that you set the limiter to ON when you are recording audio. To set the recording peak limiter to ON, press and hold down the [MENU/ENTER] button for at least two seconds to access [REC MENU], then select “ON” for [REC LIMITER]. The peak limiter is available only when the ALC is set to OFF. Adjusting the recording level • Setting an appropriate recording level The recording level is appropriate when the level meter moves as far to the right as possible without deflecting all the way, and the recording LED remains illuminated. • If the recording level is too low: Press the [Y] button to adjust the recording level so that the level meter will move moderately to the right. Note: · If an appropriate recording level cannot be achieved even if you raise the level to “40,” slide the [MIC SENS] switch to [HIGH]. MIC SENS HIGH LOW POCKETRAK CX Owner’s Manual 5. Press the [STOP/ESC ] button to stop recording. The LED will be off, and REC REMAIN TIME will be displayed on the screen. STOP 5. Press the [STOP/ESC ] button to stop recording. The LED will be off, and REC REMAIN TIME will be displayed on the screen. STOP • If the recording level is too high: The level meter frequently moves all the way to the right and the recording LED turns off. The appears on the screen when the level exceeds the specified threshold during recording. Press the [T] button to lower the recording level. 4. Press the [REC/PAUSE ] button again. The LED lights up in red, and recording begins. • Indicators displayed during recording Recording LED SPEEDPAUSE ESC PLAY Recording mode Recording level Available recording time (Recording remaining time) Folder name Recording-in-progress indicator Recording level meter File number Elapsed recording time POCKETRAK CX Owner’s Manual 3. Press the [STOP/ESC ] button to stop recording. The LED will be off, and REC REMAIN TIME will be displayed on the screen. REC 3. Press the [STOP/ESC ] button to stop recording. The LED will be off, and REC REMAIN TIME will be displayed on the screen. REC Simple recording (musical practice, meeting, etc.) Before recording, set the [ALC] switch to [ON] and the [MIC SENS] (microphone sensitivity) switch to [HIGH]. 1. Press the [FOLDER/A-B REPEAT] button located on the side panel repeatedly to select a folder into which to record. MIC SENS HIGH LOWON OFFALC Hint: · Pressing the [FOLDER/A-B REPEAT] button FOLDER repeatedly will scroll through the folders. As an example, select one from folders A-D. 2. Press the [REC/PAUSE ] button. The LED lights up in red, and recording begins. Hint: · If the recording level is too high (page 20), set the [MIC SENS] switch to [LOW]. VOL MENU ENTER SPEEDPAUSE ESC PLAYSTOP MIC SENS HIGH LOW POCKETRAK CX Owner’s Manual Playing Back Playing Back ers or the LINE (L) folder. To play back a file transferred from a computer, select the MUSIC (M) folder. 1. While the main screen is displayed, press the [FOLDER/A-B REPEAT] button located on the side panel repeatedly to select a folder from which to play back a file. ...