Votes - 2, Average rating: 4
(
)
)
|
Photos and specs Sony ICD-UX200 |
Other manuals for this model:
manual abstract
heard. • Connect the headphones to the i (headphone) jack and extend the headphone cord. • “DX/LOCAL” has been set to “LOCAL.” Set it to “DX” (page 77). You cannot preset an FM • You have already preset 30 FM radio stations. Erase unwanted radio station. preset stations (page 67). • “Scan Sensitivity” has been set to “Low(SCAN L).” Set it to “High(SCAN H)” (page 77). It takes a long time for the IC • If the IC recorder is required to process a large amount of data, it recorder to start. may take longer for the IC recorder to start. This is not a malfunction of the IC recorder. Wait until the start-up display disappears. 108GB Symptom Remedy Symptom Remedy • Take out the battery and insert it again (page 9). operate correctly. The IC recorder does not • You may have formatted the memory of the IC recorder using the operate. computer. Use the IC recorder formatting function to format the memory (page 80). The IC recorder is not recognized by your computer. A folder/file cannot be transferred from your computer. • Disconnect the IC recorder from your computer and reconnect it. • Do not use a USB hub or USB extension cable other than the supplied USB connection support cable. Connect the IC recorder directly to your computer or use the supplied USB connection support cable. • Operation is not guaranteed if you use any system requirements other than those described on page 97. • Depending on the USB port position, the IC recorder may not be recognized. If this happens, try another port. The file transferred from • The file format may differ from those that can be played back your computer cannot be using the IC recorder (MP3/WMA/AAC-LC). played back. The computer cannot start. • If you reboot the computer with the unit connected to the computer, the computer may freeze or may not start properly. Disconnect the unit from the computer and reboot the computer again. Troubleshooting 109GB Error Messages Error Messages Cause/Remedy Low Battery Level • You cannot format the memory or erase all the files in a folder because of insufficient battery power. Prepare a new battery to replace the current one. Low Battery • Battery is exhausted. Replace the old battery with a new one. Or charge the rechargeable battery or replace the old rechargeable battery with a new one. Memory Full • The remaining memory capacity of the IC recorder is insufficient. Erase some messages before recording. File Full • When there are already 99 messages in the selected folder or the total number of the file stored in the IC recorder becomes maximum, you cannot record a new message. Erase some messages before recording a message. File Damaged • You cannot play or edit messages, because the data of the selected file is damaged. Format Error • The IC recorder cannot be turned on using the computer because there is no copy of the control file required for operation. Format the IC recorder using the formatting function in the menu. Process Error • The IC recorder failed in memory access. Remove and then reinsert the battery. • Save a backup copy of your data and format the IC recorder using the menu. Set Date&Time • Set the clock; otherwise, you cannot set the alarm. No File • The selected folder does not have any messages. You cannot move a message or set the alarm, etc., because of this. 110GB Error message Cause/Remedy Error message Cause/Remedy • You set the alarm to play back a message at a date and time previously set on another message. Change the alarm setting. Past Date/Time • You set the alarm when the time has already passed. Check it and set the appropriate date and time. No Setting • If you have not set the alarm, the alarm list will not be displayed. Make the alarm setting for “New.” Settings are Full • You can set up to 30 alarms. Cancel unwanted alarms. • When 30 FM stations have already been stored in the IC recorder’s memory, you cannot preset a new FM station. File Protected • The selected message is protected and is now a “Reading only” file. You cannot erase it. Cancel the protection on the IC recorder or cancel “Read only” on your computer to edit the message using the IC recorder. Unknown Data • This data is not in a file format that is supported by the IC recorder. The IC recorder supports MP3 files (.mp3), WMA files (.wma), and AAC-LC files (.m4a). See “Design and specifications” on page 98. • You cannot play back copyright protected files. Invalid Operation • You cannot move a message or divide a message, because there is more than one folder that has files with same name. Change the file names. • A message in the folder cannot be moved or divided. • You cannot divide messages not recorded using the IC recorder. Troubleshooting New Message • The maximum recording message/music file size is 1 GB. When the recording message/music file size exceeds the maximum size limit, exceeded recording is recorded as a new message. 111GB Error message Cause/Remedy Error message Cause/Remedy folder, no folders are displayed in the display...
Other models in this manual:Dictaphones - ICD-UX200F (5.75 mb)
Dictaphones - ICD-UX300 (5.75 mb)
Dictaphones - ICD-UX300F (5.75 mb)