Votes - 2, Average rating: 3.5
(
)
)
|
Photos and specs Sony ICD-B600 |
Other manuals for this model:
manual abstract
In that case, reduce the number of messages to 98 or less by erasing unnecessary messages or by moving some of the messages to another folder before dividing a message. • If you divide a message with an alarm setting, the alarm setting remains only with the former message divided. • You cannot divide a message in the first or the last 1 second. • If you divide a message frequently, the unit may become unable to divide a message. • Once a message is divided, you cannot combine the divided messages with the IC recorder. • If you divide messages too frequently while the unit is recording them, the following phenomenon may occur: The operation indicator keeps flashing, and you cannot operate the unit for a certain period. This is not a malfunction. Wait until the operation indicator goes off. Moving Messages to a Different Folder — Move Function You can move the recorded messages to another folder. Example: Moving Message 3 in Folder A to Folder C 1 While the unit is stopped, select the message you want to move. 2 Press DISPLAY/MENU for more than 1 second until “MODE” appears in the display window. 3 Press – . or >+ to select “MOVE” and press NxPLAY/ENTER. The destination folder indication flashes. 4 Press – . or >+ to select the folder to which you want to move the message (C in this case). 5 Press NxPLAY/ENTER. The message is moved in the destination folder. 6 Press x(stop) to exit the menu mode. To cancel moving the message(s) Press x(stop) before step 5. Note The move function does not duplicate a message in another folder. When you move a message to another folder, the one in the previous folder will be deleted. You can erase the recorded messages one by one or all messages in a folder at a time. Note that once a recording has been erased, you cannot retrieve it. Erasing messages one by one When a message is erased, the remaining messages will advance and renumbered so that there will be no space between messages. 1 Press ERASE while playing back the message you want to erase or press ERASE for more than 1 second during stop mode. A beep will sound and the message number and “ERASE” will flash while the whole message is played back 10 times. 2 Press ERASE while the message is being played back. The message is erased and the remaining messages will be renumbered. (For example, if you erase Message 3, Message 4 will be renumbered as Message 3. When erasing is completed, the unit will stop at the beginning of the following message.) Erasing Messages To cancel erasing Press x(stop) before step 2. To erase other messages Repeat steps 1 and 2. To erase a message partially First divide the message and then follow the steps to erase the message. Erasing all messages in a folder To cancel erasing Press x(stop) before step 3. Index to Parts and Controls Main unit Rear Display window Erase Message 3 Before erasing After erasing Remaining messages are renumbered. Message 1 Message 2 Message 3 Message 4 Message 5 e.g. Folder A Message 1 Message 2 Message 3 Blank space Message 1 Message 2 Message 3 Folder B Blank space Message 1 Message 2 Message 3 * There is a tactile dot beside the control to show the direction to turn up the volume. **The button has a tactile dot. Battery compartment Hook for handstrap (not supplied) Folder indication Remaining battery indicator Microphone sensitivity Alarm indicator Selected message number REC DATE (recorded date) indication REMAIN indicator Remaining memory indicator Recording mode indication REC (recording) indicator Repeat play indicator Number of messages in a folder/Menu indication/ Counter /Remaining time indication /Recording date indication /Current time indication /Messages 3While the display is flashing, press ERASE. 1Select the folder you want to erase using DISPLAY/MENU. (See “Selecting the Folder” on the front side.) 2While pressing x(stop), press ERASE for more than 1 second. “ALL ERASE” will flash for 10 seconds. Message 1 Message 2 Message 3 Message 4 Operation indicator ERASE VOL (volume) control* HOLD NxPLAY/ENTER** Built-in microphone i (headphone) jack (microphone) jack Display window DISPLAY/MENU DIVIDE x(stop) zXREC (record) – .(review/fast backward)/ >+ (cue/fast forward) Speaker To cancel the alarm setting before the playback starts Press x(stop) while the alarm sound is heard. You can stop even when the HOLD function is activated. Notes • You cannot set the alarm if you have not set the clock or there is no message in the selected folder (the unit will not enter the alarm setting mode when you press DISPLAY/MENU in Step 2). • If you try to set the alarm to play back a message at a previously set time on another message, “PRE SET” will be displayed, preventing new settings. • If you try to set the alarm to the time before the current time, “BACK-D” appears in the display window and you cannot set the alarm. • If the alarm time comes while another message is being played back with an alarm, the playback stops and the new message will be played back. • If the a...