Votes - 4, Average rating: 4 ( )

Manafacture: Olympus File size: 9.71 mb File name: Language of manual:

Other manuals for this model:

Dictaphones - DS-50 (8.65 mb)

1 Press the + or – button to choose “Finish”. 2 Press the OK button to complete the setup screen. Programmed settings will be applied and the screen will return to the preset number selection menu. If the On/Off setting is set to On, and (Timer indicator) will appear on the display. If you press the 0button without pressing the OK button, all settings will be canceled and it will return to the preset number selection menu. a Timer indicator When setting other preset numbers, repeat Steps 4 through 8. 9 9 Press the STOP button to close the menu. Timer Recording Timer Recording (Timer Rec) Notes • If the recorder is in use at the preset start time, the timer recording will start directly after stopping the recorder. • Even if the power if turned off or the recorder is put on Hold, timer recording will start at a specified time. • If three timer recordings have the same starting times, “Preset 1” has the highest priority and “Preset 3” has the lowest. • If the starting time for timer recording and alarm playback(P59) is set for the same time, timer recording will have priority. • If the batteries run out while recording based on the timer setting, the recorder will stop recording. Check the battery power before starting the timer recording. • The microphone sensitivity switch setting will be canceled during timer recording. • If the “Time & Date” is not correct, timer recording cannot be set at the specified time, so make sure the “Time & Date" is correct before setting timer recording. If it is not correct, reset “Time & Date” (P18). Timer Recording 3 3 About Playback Playing Playing The recorder can play back WMA and MP3 format files. To play back a file recorded with other machines, you need to transfer (copy) it from a computer (P112). Files saved in the Audible folder can play back in the Audible mode. For operation methods in the Audible mode, see P153. 1 1 Press the FOLDER button to choose a folder. Every time the FOLDER button is pressed, it cycles through folders and the List display will appear (P20). List display 2 2 Press the + or – button to choose the file that you want to play. If the 9button is pressed, the File display will open. In the File display, press the 9or 0 button to select a file. File display If you want to return from the File display to the List display, or go back from the List display to a higher-level List display, press the LIST button. 1 2 3 Playing 3 Playing3 4 5 3 3 Press the PLAY or OK button to start playback. The record/play indicator light glows green. For files created using machines other than this recorder, the file format will appear on the display. ....MP3 files ....WMA files a Play position bar indicator b Current playback time c File name d File format indicator 4 4 Press the + or – button to select the proper sound volume. The display shows the volume level. You can choose between 0 and 30. e Volume level meter 5 5 Press the STOP or OK button at any point you want to stop the playback. Stop a file play back at any point. Press the PLAY or OK button to start playing back from where it was stopped. You can change the display patterns ( P82). The displays indicated in this manual are default. Playing Forwarding Press and hold the 9button while the recorder is stopped. . If you release the button, it will stop. Press the PLAY or OK button to start playing back from where it was stopped. a File length Press and hold the 9button while playing a file. . When you release the 9button the recorder will resume normal playback. 3 Playing • If there is an index mark or temp mark (P66) in the middle of the file, the recorder will stop at that location. • The recorder stops when it reaches the end of the file. Continue pressing the 9button to proceed with the cue from the beginning of the next file. Rewinding Press and hold the 0button while the recorder is stopped. . If you release the button, it will stop. Press the PLAY or OK button to start playing back from where it was stopped. a File length Press and hold the 0button while playing a file. . When you release the 0button the recorder will resume normal playback. • If there is an index mark or temp mark (P66) in the middle of the file, the recorder will stop at that location. • The recorder stops when it reaches the beginning of the file. Continue pressing the 0 button to proceed with the review from the end of the previous file. • If the 0button is kept pressed while the recorder is stopped at the start of the top file, the recorder will fast rewind starting from the end of the last file. Playing Locating the Beginning of the File Playing Press the 9button during playback, slow playback, or fast playback. . The next file is cued and playback starts at the previously set speed. Press the 0 button during playback, slow playback, or fast playback. . The file being played is cued and playback starts at the previously set speed.* Press the 0button 2 times during playback, slow playback or fast playback. . The previous file is ...

Download now

Please, enter two numbers from picture: