Votes - 4, Average rating: 4.3
(
)
)
|
manual abstract
Press the REC/STOP button again to stop recording. NOTES: • The first few sounds activate the recorder and may not be recorded. • Avariationinvoicelevelduringrecordingwillnot stop the unit, two seconds of silence is required to stop the recording. • For constant recording, see page 15. • To pause, press the MODE/PAUSE button. • The built-in audio level automatically sets the recording level. • For normal voice levels, a distance of 5-9 inches is appropriate. 18 OPERATIONOPERATION TO PLAY BACK MESSAGES 1 Turn the unit on (by pressing the REC/STOP or PLAY/STOP button) and select a File Folder by pressing the FILE/TIME button (see page 13). 2 12 Select the desired message number by pressing the REV 1 or FWD 2 button; the message number and the message length will appear in the display. 19 OPERATION213OPERATION213 Press the PLAY/STOP button 1; the unit will play thecurrentlyselectedmessage,thenstop. During playback, the Play indicator and the elapsed time ofthe messagewill appearin the display.Youcan check the message recording time and date by pressing the REC/STOP button 2. The unit will return to the elapsed time after five seconds. NOTES: • To adjust the volume, simply press the VOL+ or VOL– button. • To pause, press the MODE/PAUSE button; PAUSEwillblinkinthedisplay.Toreleasepause, presstheMODE/PAUSEbuttonagain. • For Cue and Review during playback, simply press and hold the desired REV or FWD button. Release the button when the desired point is reached. • To skip or go back to messages, simply press and release the desired REV or FWD button untilthedesired message numberis reached. 20 OPERATIONOPERATION TO REPEATEDLY PLAY BACK MESSAGES You can set the unit to repeat 1 or repeat all messagesintheselectedfilefolderasfollows: 1 21 REPEAT MESSAGE: While playing back a message, press the DEL/REPEAT button 1 once; “REPEAT” will appear in the display and the message playing will repeat over and over until the PLAY/STOP button 2is pressed. 2 21 REPEAT ALL MESSAGES IN THE SELECTED FILE FOLDER: While playing back a message, press the DEL/REPEAT button 1twice; “REPEAT ALL” will appear in the display and all messagesin the selected file folder will repeat over and over until the PLAY/STOP button 2is pressed. 21 OPERATIONOPERATION TO CANCEL REPEAT PLAYBACK: To cancel repeat playback, press the DEL/REPEAT button once or twice until the REPEAT indicator disappears from the display. TO PAUSE A MESSAGE 1 Topause Recordingor Playback,press the MODE/PAUSE button; PAUSE will blink in the display. 2 Press the MODE/PAUSE button again to resume recording or playback. 22 OPERATIONOPERATION SCAN PLAYBACK This unit can play back the first five seconds of each recorded message as follows: 1 21 While in the Standby mode, select the file folder (A,B,C,D) using the FILE/TIME button 1. Press andholdthePLAY/STOPbutton 2for2seconds; SCAN will appear in the display. The unit will automatically scan and play the first five seconds of each message in the selected file folder, starting at message one. 2 The unit will automatically stop after all messages have been played. To play back the message during scanning, press the PLAY/STOP button once to change to Playback mode. To stop Scan Playback, press the PLAY/STOP button twice. 23 OPERATIONOPERATION ERASING A SINGLE MESSAGE 12312 While in the Standby mode, select the desired file folder using the FILE/TIME button 1, and the desired message to delete using the REV 2or FWD 3button; the message number and the message length will appear in the display. Press the DEL/REPEAT button; ERASE will appear in the display and the first five seconds of the message will play. To erase, press the DEL/REPEAT button within the five seconds while it is playing and the rest of the messages will be renumbered. If you do not want to erase, do not press the DEL/REPEAT button while it is playing. (You can also press the PLAY/STOP button to cancel and stop playback.) 24 OPERATIONOPERATION ERASING ALL MESSAGES 2112 While in the Standby mode, press and hold the DEL/REPEAT button 1first, then press and hold the REC/STOP button 2 for two seconds; ALL and ERASE will blink in the display. Toeraseallthemessages,presstheDEL/REPEAT button again within five seconds. If the DEL/REPEAT button is not pressed again within the five seconds, the messages will not erase. IMPORTANT NOTES: • Once message(s) are deleted, they cannot be recovered. • Ifthememoryisfull,FULLwillappearinthe display when you press the REC/STOPbutton to start recording. The recording will be disabled. 25 CAREANDMAINTENANCECAREANDMAINTENANCE RESETTING THE UNIT If the unit is exposed to a strong static electrical charge, the unit may lock up, or the display may dim. This is very rare, but if it does happen, remove the batteries and then reinstall. All settings will return to their preset values, but the previous messages are saved. TRAFFIC SAFETY • Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas. • Even...