Votes - 2, Average rating: 4.5
(
)
)
|
manual abstract
• Never use near cars and other motor vehicles, near streets, steps, sloped driveways, hills, roadways, alleys, swimming pool areas or other bodies of water. • Always wear shoes or sneakers. • Never allow more than one rider. This product contains small parts in its unassembled state. Adult assembly is required. • Please keep this instruction sheet for future reference, as it contains important information. • Adult assembly is required. • Tools required for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (not included). • Age: 2-5 years • Weight limit: 55 lbs (25 kg). • Please save all packaging material until assembly is complete to ensure that no parts are discarded. • Please wipe each part with a clean, dry cloth before assembly. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. ©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN MEXICO P6831pr-0920 2 Parts Seat 2 Fork Covers Front Wheel Assembly Fork Handlebar Back Upper Steering Ring Lower Steering Ring Rear Axle Seat Pin 2 Rear Wheel Hubs 2 Pedal Blocks Note: Some parts shown are assembled to both sides of the trike. 4 Pedal Hubs Part not shown: Label Sheet Handlebar Front Frame 2 Rear 2 Rear Wheels Wheel Caps #8 x 2." Screw - 1 #6 x 1/2" Screw - 2 *We’ve included one extra .354" cap nut for your convenience. Note: Tighten and loosen the screws with a Phillips screwdriver. Do not over-tighten the screws. #8 x ." Screw - 6 ALL FASTENERS SHOWN ACTUAL SIZE .354" Cap Nut - 2* .354" 3 Assembly • Slide a rear wheel hub, rounded side up, onto the rear axle. • Slide a rear wheel, indented side down, onto the rear axle. 1 Rear Wheel (Indented Side Down) Rear Wheel Hub (Flat Side Down) Rear Axle 3 • Turn the assembly upright. • Slide a rear wheel, rounded side fi rst, onto the end of the rear axle. • Slide a rear wheel hub, pointed end first, onto the end of the rear axle. Rear Wheel (Flat Side First) Rear Axle Rear Wheel Hub (Pointed End First) Rear Axle Assembly Frame 2Bottom View • Turn the frame upside down. • Insert the rear axle assembly through the holes in the rear of the frame. .354" 4 • Fit a cap nut on the end of the rear axle. • Tap the cap nut with a hammer. Gently pull the rear wheel to be sure the cap nut is securely attached to the rear axle. Hint: You may need the help of another adult to hold the other end of the rear axle in place. 4 Assembly Rear Wheel Hub Rear Wheel Cap 5 • Fit the tabs on a rear wheel cap into the slots in the rear wheel hub. Push to "snap" the rear wheel cap in place. • Repeat this procedure to attach the other rear wheel cap to the other wheel hub. Pedal Axle Tab Pedal Hub Pedal Hub 6 • Fit two pedal hubs onto the pedal axle tabs. Make sure the tabs fit into the slot in each pedal hub. • While holding the pedal hubs on the pedal axle, insert the pedal axle into the hole in the center of the front wheel. • Press the pedal hubs into the center of the front wheel until th...
Other models in this manual:Toys - R0322 (859.8 kb)