Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
Requires four “D” (LR20) alkaline batteries for the mobile and two “AA” (LR6) alkaline batteries for the remote. (Batteries not included.) Tool required for battery installation: Phillips screwdriver (not included). C0108 Butterfly Dreams™ Mobile with Remote Control Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Requires four “D” (LR20) alkaline batteries for the mobile and two “AA” (LR6) alkaline batteries for the remote. (Batteries not included.) Tool required for battery installation: Phillips screwdriver (not included). C0108 Butterfly Dreams™ Mobile with Remote Control Parts Clamp Crib Adapter Base 3 Butterfly Spokes 3 Soft Toy Spokes 3 Soft Toys Arm Hub #6 x 5/8" Screw - 1 Both Shown Actual Size #4 x 3/8" Washer Head Screw - 3 Remote IMPORTANT! • Possible entanglement injury, keep out of baby’s reach. • Remove mobile from crib or playpen when baby begins to push up on hands or knees. WARNING This toy contains small parts in its unassembled state. Adult assembly is required. CAUTION •A crib mobile is intended for visual stimulation and is not to be grasped by a child. •When used on a dresser top, keep out of baby’s reach. •Always attach by all provided fasteners (clamp) tightly to a crib or playpen according to the instructions. Check frequently. •Do not add additional strings or straps to attach to a crib or playpen. 2 22 Mobile Features 1 2 3 4 5 6 7 1 2 3 4 5 6 7 Light Select Button – Choose dome light, night light, both lights or no lights. Song Select Button – Press to choose from six different songs. Light Dome – Projects butterflies and leaves onto baby’s ceiling. Start Button – Starts or restarts music and soothing lights. Power/Volume Switch -Choose high volume , low volume , no sound or power off . Receiver Dome – Accepts signal from the remote. Dome needs to be turned so it aligns with the transmitter window on the remote. Night Light – Features softly glowing colors. 3 Remote Features Button - Press to activate the mobile once the mobile has been turned ON. Press again to stop the mobile. LED Signal Indicator - Lights when the button is pressed to let you know the remote has transmitted a signal to the transmitter. Transmitter Window - Remote transmits a signal to the receiver dome on the mobile. Handle - Flips up so you can hang the remote on a door knob. Snaps around bottom of the remote when not in use. Battery Compartment - Insert two “AA” alkaline batteries. Please refer Rear ViewFront View 1 1 2 3 4 5 3 4 4 5 2 to Battery Installation on page 5. For longer battery life, use alkaline batteries only. 4 Battery Installation Mobile Base Remote Battery Compartment Battery Compartment Mobile Base •Locate the battery compartment door on the back of the mobile base. •Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door. Hint: If the crib adaptor is attached to the base, loosen the screws in the crib adaptor and remove it first. • Insert four “D” (LR20) alkaline batteries. Hint: We recommend using alkaline batteries for longer battery life. •Replace the battery compartment door and tighten the screws with a Phillips screwdriver. Do not over-tighten. IMPORTANT! Under normal use conditions, the batteries in the mobile will require replacement more often than the batteries in the remote. When sounds or light become faint or movement of the mobile is sluggish, it’s time for an adult to replace the batteries in the mobile base. Remote •Locate the battery compartment door on the back of the remote. •Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door. • Insert two “AA” (LR6) alkaline batteries. Hint: We recommend using alkaline batteries for longer battery life. •Replace the battery compartment door and tighten the screw with a Phillips screwdriver. Do not over-tighten. IMPORTANT! If the mobile does not respond to the remote, it does not mean that the battery power in the remote is low. Replace the batteries in the remote if the LED signal indicator on the remote is dim when the button is pressed. If the LED signal indicator does not light after installing new batteries in the remote, check the orientation of the batteries in the battery compartment to make sure they are properly installed. 5 Battery Safety Information 1,5V x 2 “AA” (LR6) Shown Actual Size 1,5V x 4 “D” (LR20) Shown Actual Size + - Batteries may leak fluids that can cause a chemical burn injury or ruin your toy. To avoid battery leakage: • Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium). • Insert batteries as indicated inside the battery compartment. • Remove batteries during long periods of non-use. Always remove exhausted batteries from the toy. Dispose of batteries safely. Do not dispose of batteries in a fire....