Login:
Votes - 0, Average rating: 0 ( )

User manual Philips, model SCF260/23

Manafacture: Philips
File size: 2.02 mb
File name:
Language of manual:enesfr
Free link for this manual available at the bottom of the page



Other manuals for this model:

manual abstract


Keep out of the reach of children. EITHER: Mix one pack of citric acid (10g) with 7oz/210ml of water. Pour solution into the empty warmer. DO NOT place a bottle, jar or cup into the warmer when de-scaling. Close the lid of the warmer and set the warmer to run with 11oz/325ml of milk from frozen. After the warming cycle has ended, leave the solution to cool for 30 minutes before emptying the warmer and rinsing with tap water. Wipe the inside and outside of the warmer with a damp cloth only. OR: Pour 3.5oz/100ml of vinegar mixed with 7oz/210ml of cold water into the warmer. Allow liquid to stand in the unit until any limescale has dissolved. DO NOT place a bottle, jar or cup into the warmer when de-scaling. DO NOT start the warming cycle. Empty the unit and rinse thoroughly. Wipe the inside and outside of the warmer with a damp cloth only. Key to Product Label TYPE B APPLIED PARTFOLLOW OPERATING INSTRUCTIONSONLY USE INDOORSCLASS II EQUIPMENTGENERAL WARNINGEUROPEAN STANDARDDISPOSE OF THROUGH SEPARATE COLLECTION ROUTE FOR WASTE ELECTRICAL EQUIPMENT Troubleshooting Guide Food is not warm enough The temperature of warmed food depends on the consistency of the food. Philips AVENT recommends that, ideally, pureed food only should be heated with this warmer. If you find that thicker food is not warm enough at the end of the warming cycle, fill the warmer with an additional 1oz/30ml of water. On step 4 and 5, choose the food from room temperature mode and program the warmer at the 1oz/30ml option. Before feeding your baby, stir the food. Always check food temperature before feeding. Milk is not warm enough If you find that milk is not warm enough at the end of a warming cycle, fill the warmer with an additional 1oz/30ml of water. On step 4 and 5, choose the milk from room temperature mode and program the warmer at the 1oz/30ml option. Before feeding your baby, shake the bottle, nurser or storage container gently and check the temperature of the milk by sprinkling a few drops on the backof your hand. Display will not illuminate / Warmer will not turn on Check that the lid is closed correctly. Check that the warmer is plugged in correctly. Then hold the Power/Mode Selection Button for 3 seconds. Symbols on thedisplay are flashing • If the milk, room temperature and oz/ml symbols are flashing, then the lid has not been closed correctly. • If all volume symbols are flashing, and the warmer beeps intermittently for30 seconds then the cycle is complete. Follow Step 8 onwards to remove the bottle or container from the warmer. • If all mode and starting temperature symbols are flashing, then the unit requires de-scaling. See section ‘Care of your warmer’ on page 8. To acknowledge the de-scale warning, press and hold the Power/Mode Selection or Volume Selection/Start Button for 3 seconds. If you do not wish to de-scale, please be aware that this may cause irreparable damage. The warmer is beeping • If oz/ml symbols flash, and the warmer beeps twice, insufficient water has been placed in the warmer. Unplug the warmer, discard the milk or food and empty any remaining water. Be careful as the warmer is hot. Follow instructions fromStep 1 onwards. • If all volume symbols are flashing, and the warmer beeps intermittently for 30 seconds then the cycle is complete. Follow Step 8 onwards to remove the bottle or container from the warmer. To stop thewarming cycle Press the Power/Mode Selection Button and the warmer will beep and return to default settings. To start the warming cycle Once the correct mode, starting temperature and volume have been selected, press and hold the Volume Selection/Start Button until the warmer beeps. If the lid is opened during warming cycle If the lid is opened at any time during the warming cycle, the lights on the display panel will flash and the warmer will stop and return to default settings. In order to reset the warmer after the lid has been opened, empty out any residual water, then follow instructions for use from step 1 onwards. Since this could occur at any stage of the warming cycle, milk or food should be discarded for safety reasons. Difficulty setting the appropriate amount of frozen food The maximum volume that may be selected when warming food from frozen is 8oz/240ml. ES Gracias por elegir Philips AVENT El Calentador de Biberones y Comida para Bebe Philips AVENT iQ es el unico calentador con laTecnologia iQ avanzada, disenado para inteligente y precisamente ajustar el tiempo de calentamientoa base del contenido y la cantidad. Si calienta leche o comida para bebe que esta congelada, refrigerada o de la temperatura ambiente, el Calentador de Biberones y Comida para Bebe iQ la calentara rapiday seguramente, y de manera uniforme – sin dejar lugares calientes. El diseno versatil sostiene todoBiberon AVENT, Vasito VIA, Tempo y tarros de comida para bebe. Por favor tome 5 minutos para leer el FOLLETO DE INSTRUCCIONES EN SU TOTALIDAD, inclusive las advertencias, antes de utilizar su Calentador de ...

Other models in this manual:
Baby Accessories - SCF260/11 (2.02 mb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category