Votes - 4, Average rating: 3.8 ( )

Manafacture: Fisher-Price File size: 836.06 kb File name: Language of manual:

10 Crotch Belt Waist Belt Waist Belt 1 •To prevent falls, never use with an active child who may be able to climb out of the seat. •Never leave child unattended. •To prevent injury or death from falls or sliding out, always use restraint system. Never rely on the tray to restrain child. WARNING B 2 Tighten B Loosen To tighten the restraint: •Feed the anchored end of the waist belt up through the buckle to form a loop . •Pull the free end of the waist belt . •Repeat this procedure to tighten the other waist belt. To loosen the restraint: •Feed the free end of the waist belt up through the buckle to form a loop . • Enlarge the loop by pulling on the end of the loop toward the buckle. •Pull the anchored end of the waist belt to shorten the free end of the waist belt . •Repeat this procedure to loosen the other restraint strap. Note: After adjusting the restraint to fit your child, make sure you pull on it to be sure it is securely fastened. B B IMPORTANT! Before each use, inspect this product for dam- aged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts. Securing Your Child •Place your child in the seat. Position the crotch belt between your child’s legs. •Fasten both waist belts to each side of the crotch belt. Make sure you hear a “click” on both sides. •Check to be sure the restraint system is securely attached by pulling it away from your child. The restraint system should remain attached. 10 Crotch Belt Waist Belt Waist Belt 1 •To prevent falls, never use with an active child who may be able to climb out of the seat. •Never leave child unattended. •To prevent injury or death from falls or sliding out, always use restraint system. Never rely on the tray to restrain child. WARNING B 2 Tighten B Loosen To tighten the restraint: •Feed the anchored end of the waist belt up through the buckle to form a loop . •Pull the free end of the waist belt . •Repeat this procedure to tighten the other waist belt. To loosen the restraint: •Feed the free end of the waist belt up through the buckle to form a loop . • Enlarge the loop by pulling on the end of the loop toward the buckle. •Pull the anchored end of the waist belt to shorten the free end of the waist belt . •Repeat this procedure to loosen the other restraint strap. Note: After adjusting the restraint to fit your child, make sure you pull on it to be sure it is securely fastened. B B Adjusting the Seat Using the Tray Using the Toybar • Lift or lower the toybar for baby's enjoyment. 11 Toybar Adjust the seat angle in any of three positions: Upright, Semi-Recline or Recline. To adjust the seat angle: • Push down on the seat back to position the seat wire in the desired groove in the bracket for Upright, Semi-Recline or Recline. 5 • Fit the tray onto the seat arm rests. Tray 4 3 Upright Semi-Recline Recline Swing Modes 12 The Smart Response Swing has two modes: Baby Sounds Activated and Parent Activated . Parent Activated IMPORTANT! The maximum weight limit for this product is 24 lbs. If your child weighs less than 24 lbs., but is really active and appears to be able to climb out of the swing, immediately discontinue its use. Baby Sounds Activated Swing Modes 12 The Smart Response Swing has two modes: Baby Sounds Activated and Parent Activated . Parent Activated IMPORTANT! The maximum weight limit for this product is 24 lbs. If your child weighs less than 24 lbs., but is really active and appears to be able to climb out of the swing, immediately discontinue its use. Baby Sounds Activated Baby Sounds Activated 13 Sound Sensitivity Dial •Slide the switch to high sensitivity for incoming sounds (listens for shallow sounds). •Slide the switch to low sensitivity for incoming sounds (listens only for loud sounds). Music/Volume Switch •Select for music highest volume. •Select for music high volume. •Select for music low volume. •Select to turn music off. Speed Dial •Select any of five speed settings. Swing Mode Switch •Slide the switch to baby sounds activated.The power L.E.D. lights. The swing begins swinging for about 15-20 minutes. If you have selected music, five songs play (about 15-20 minutes). The swing is ready to listen for your baby’s sounds for about two hours. •When baby cries, the swing automatically turns on to soothe baby. •If the swing is not activated (from baby’s sounds) within two hours of selection, the power L.E.D. flashes to tell you that it going to turn off. Once it has turned off (and the power L.E.D. is not lit), you will need to slide the switch to the off position and back to baby sounds activated. The swing is now re-set to listen for your baby’s sounds for another two hours. •Be sure to turn the product off when not in use. Hint: You may want to start with the high sensitivity setting at first. Hint: As with most battery-powered swings, a heavier child will reduce the amount of swinging motion on a...

Download now

Please, enter two numbers from picture: