Votes - 3, Average rating: 4.7
(
)
)
|
manual abstract
Please take a few minutes to carefully read the following instructions and warnings before using your hisense microwave bottle sterilizer for the first time. PARTS: Drying BEFORE FIRST USE: Wash all items with soap and warm water, then rinse with clean water. DIRECTIONS: • Place drying rack in sterilizer base. • Place bottles and bottle accessories on drying rack. • Pour 200 ml./7oz. of tap water into base, (use baby bottle for measuring). • Place lid on base and make sure it is properly closed. • Place sterilizer in center of microwave. • Set microwave timer to 5 minutes at high level. • After microwave operation ends, wait at least 2 minutes to allow sterilizer to cool down, Then carefully remove from microwave. • Use tongs to remove the bottles. • Bottles remain sterile for up to 24 hours if lid remains closed. • Place draying rack according to the mark (this side up) • Insert A into slot B • For 4-6 bottles place C into slots in circle D. • For less than 4 bottles place C into any slots you choos ASSEMBLING DRYING RACK: D © hi sense IMPORTANT: • Always use recommended amount of water. Too much or not enough water will affect the operation of the sterilizer. • Never use disinfectants, chemicals or cleaning detergents of any kind while sterilizing baby bottles. • If using an integrated microwave-oven device, make sure the oven function is disabled. CLEANING AND CARE: • Empty water left in sterilizer base. • Wash to prevent accumulation of scale. • Do not clean the sterilizer with abrasive materials. • Store sterilizer only when completely dry. • All sterilizer parts are dishwasher safe.(place on top dishwasher’s shelf). WARNINGS: • The sterilizer and contents will be extremely hot when microwave action ends. Handle with caution! • When removing from microwave, be sure to keep the sterilizer level to avoid spilling hot water. • When opening the lid, turn it away from your body to avoid scorching from hot steam. • Use supplied tongs to handle sterilized items. • Do not over-load sterilizer. • Do not place bottle caps upside-down to prevent accumulation of water. • Do not leave sterilizer parts in direct sun light or heat-source when not in use. • Do not clean bottle brush in sterilizer. • Use only to sterilize baby bottles and/or baby bottle accessories. • Keep out of the reach of children. • Do not use without water. Manufactured for /i/sense Visit us at : For any questions please contact us at: hisense@netvision.net.il PG_v.07.2008...