Votes - 4, Average rating: 4.3 ( )

Manafacture: Badger Basket File size: 435.63 kb File name: Language of manual:

• DO NOT allow other children or pets to climb into or onto the bassinet when your infant is inside. • DO NOT attach or place toys with strings in or around the basket. Strings can cause strangulation or choking. • Keep bassinet away from stoves, heaters, camp fires/flames, fireplaces, stairs, open windows, window blinds, running or standing water, and any other hazard which could cause injury to your baby. • NEVER use plastic bags inside the basket such as to cover the mattress. • Bassinet should always be placed on a firm, flat surface. It should never be placed near stairs or on tables or elevated surfaces. • READ ALL INSTRUCTIONS before use of this product. Keep instructions for future use. Product and/or hardware may include small parts or screws with sharp points. • Choking Hazard! Keep unassembled parts out of the reach of small children. Use only the parts and hardware provided by Badger Basket. • Do not use the bassinet if it is damaged or broken. • Periodically check to make sure all the bolts and screws remain tight. Page 2 of 6 3.0/1108/TG PARTS & HARDWARE: TOOLS NEEDED: Phillips Screwdriver* * Power screwdriver is helpful but be careful not to damage the product PARTS INCLUDED (pictures not to scale): (A) 2 - End Panels (note inside and outside faces) (B) 4 - Rails (C) 8 - Bolts (D) 2 - Nylon Snap Straps (E) 2 - Dowels (F) 1 - Mesh Basket (G) 1 - Set of Caster Wheels, includes: 4 Wheels, 4 Bolts, 4 Knobs (H) 1 -Bassinet Body (not shown) (I) 1 - Bedding Set (not shown), includes: 1 Liner/Skirt, 1 Sheet, 1 Hood Cover (J) 1 - Mattress Pad (not shown) (K) Hood Hoop Frame (2 pieces, not shown) (L) 2 - Side Panels, 1 - Bottom Panel (for Toy Box Base) C D B F G E A A L USE AND CARE INSTRUCTIONS: Wipe the wood/MDF parts clean with a damp cloth and mild soap as needed. Spot clean basket as needed. Bedding Set can be machine washed on cold, gentle cycle; tumble dry low or no heat. Page 3 of 6 3.0/1108/TG PICTURE 1 STEP 1: See PICTURE 1. Take ONE END PANEL (A) and attach the FOUR RAILS (B) using FOUR BOLTS (C). Attach the rails to the INSIDE FACE of the END PANEL. The inside face has countersunk areas for the rails and slots that you will use later for the mesh basket. Position the bottom rails with the grooves facing up; and position the top rails with the grooves facing down. Slip the TWO NYLON SNAP STRAPS (D) over the TOP RAILS (B). Position them so that they are ready to snap to the snaps on the bassinet body (H). STEP 2: See PICTURE 2. Attach the second END PANEL (A) to the FOUR RAILS (B) using FOUR BOLTS (C). STEP 3: See PICTURES 3A and 3B. Turn the bassinet stand upside down. Insert the TWO DOWELS (E) through the edge pockets of the MESH BASKET (F). Insert the ends of the ONE DOWEL (E) into the SLOTS cut into the inside faces of the END PANELS (A). Stretch the mesh basket over the rails and around to the other side, and insert the second wood dowel into the dowel slots. Adjust the mesh basket to remove wrinkles. Attach the FOUR CASTER WH...

Download now

Please, enter two numbers from picture: