TIME • WATER RESISTANT TO 330 FEET OR 100 METERS • NIGHT VISION™ BACKLIGHT To operate your FreeStyle® watch, please follow these instructions: The term “MODE” refers to the function status of the watch.) Normal time mode shows hours, minutes, seconds, and the day of the week. To set time, see instructions below: HOW TO SET NORMAL TIME, CALENDAR & 24-HR. TIME FORMAT From “Normal Time” mode, press and hold MODE button; alarm time will flash. Press MODE button again; seconds digits will flash. Pres

Release the S3 button and press it again. The seconds digits will flash. Press the S1 button to reset the seconds to zero. After resetting the seconds, press the S2 button to flash the minute digits. Advance the digits by pressing the S1 button. Press the S2 button again to flash and set the hour digits. Advance the digits by pressing the S1 button. Press the S2 button again to flash and set the month digits. Advance the digits by pressing the S1 button. Press the S2 button again to flash an

The second timer may be used to track the time in a different | time zone. These modes are represented by the segments “T1” or “T2” in the top right comer of the I display. To toggle between T1 and T2, press and hold LAP/RESET for | two seconds. To set these time modes, press and I hold SET/ENTER for three seconds. The segment “12H” will flash. This | represents time in 12 hour mode. To change the time to 24 hour mode, press START/STOP. Once 12 or 24 hour mode is selected, press MODE. The seg

Advance the hands by turning the crown. Once you have set the correct time, press the crown in all the way. HOW TO SET DIGITAL TIME NOTE: Blue digits represent flashing segments. In normal time mode, press the S3 button three times. The seconds digits will flash. Press the S2 button to set the minutes. Press the S1 button again to flash the hour. Press the S2 button to set the hour. AM and PM are represented by an “A” or a “P” on the seconds display screen. To set the watch in 24-hour mode,

Advance the hands by turning the crown. Once you have set the correct time, press the crown in all the way. HOW TO SET DIGITAL TIME NOTE: Blue digits represent flashing segments. In normal time mode, press the S3 button three times. The seconds digits will flash. Press the S2 button to set the minutes. Press the S1 button again to flash the hour. Press the S2 button to set the hour. AM and PM are represented by an “A” or a “P” on the seconds display screen. To set the watch in 24-hour mode,

TIME • WATER RESISTANT TO 165FT/50M • NIGHT VISION™ BACK LIGHT KEY TO SYMBOLS LIGHT BUTTON: In order to activate the light feature I on this display, simply press the light button. The light will remain on for a few seconds after you release your finger. Control of watches: Normal Display : Hour, Minute, Second and Day of week. Push of S1-Button : I Display shows alarm time in Hour and Minute. Push of S2-Button : | Month, Date and Day of week. Push of S3-Button : For change of Func

In the Timekeeping Mode, press C four times to enter the Hand Setting Mode. 2. Hold down A until 0 0 starts to flash, which indicates the analog setting screen. • The second hand is at the proper home position if it moves to 12 o’clock. If it doesn’t, press B to move it to 12 o’clock. lll ll lll l l l l l ll llll l l Second hand 3. After confirming that the second hand is at the proper home positions, press C. This will switch to hour hand and minute hand home position adjustment (Hm flashed). •

• DUAL TIME • OPTIONAL 24-HR. TIME (MILITARY TIME) • WATER RESISTANT TO 300 FT. • NIGHT VISION™ ELECTROLUMINESCENT BACKLIGHTING KEY REFERENCES D - Clear B - Light A - Stop C - Mode E - Lap NORMAL TIME MODE (The term “mode” means the function status of the watch.) “Normal time mode” shows hours, minutes, seconds, day, date. To set time, see operating instructions on “How to Set Normal Time.” HOW TO SET NORMAL TIME, DATE AND 24-HOUR FORMAT Before setting time, you must be in “normal time mode.” Pr

The chime indicator will appear. HOW TO USE THE CHRONOGRAPH For a straight forward count-up, 1. Select CHRONO mode using the MODE button. The last recorded lap time of the chronograph will be displayed on top of the last accumulated time. Hold the LAP button for two seconds to clear the old records. | 2 Press the START/STOP button once to start the chronograph. The watch will start counting from 00'00"00 if the watch is cleared. Otherwise, it will pick up from where it last left off. The wa

TO SET THE ANALOG TIME: 1. Pull crown out to first click position B. 2. Turn crown to set time. 3. Push crown back to position A. DISPLAY MODES: The watch has four display modes: HOME TIME (TIME) / FOREIGN TIME (TM-2), HOME TIME ALARM (ALM1) / FOREIGN TIME ALARM (ALM2), STOPWATCH (STW) and TIMER (TMR). To change from one display mode to another, press S3 button once. The mode description will appear for approximately 2 seconds before the selected mode is activated. PROMPTING ARROWS: The S1, S2 a