Votes - , Average rating:
(
)
)
Manafacture: Philips
File size: 556.17 kb
File name:
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
manual abstract
3 Press / repeatedly to select a preset sequence number. 4 Press PRESET to confirm. » The radio station is stored with the selected sequence number. 5 Repeat steps 1-4 to program more radio stations. • To tune to a stored radio station, press PRESET to access the list of stored radio stations, and then press / repeatedly. EN 13 Note •• If you store a radio station with the sequence number of another one, the earlier one is overwritten. Display DAB information The name of current DAB station is displayed. You can also view the other information. To cycle through available information, press repeatedly. • Dynamic label segment (DLS) • Signal strength • Program type (PTY) • Ensemble name • Frequency • Signal error rate • Bitrate codec Use DAB menus 1 Press and hold to access the DAB menus. 2 Press / repeatedly to toggle through the menus. Re-scan for stations Full scan is used to perform a wide range search for DAB radio stations. Press to start scanning for available DAB stations. »»After the scanning is complete, the first stored station is broadcast. Tune to a station manually With this feature, you can tune to a specific channel/frequency manually. In addition to antenna orientation for better radio reception, the optimal reception can also be obtained with this feature. 1 Press to access the station list. 2 Press / repeatedly to select a station from 5A to 13F. 3 Press to confirm the option. DRC (Dynamic Range Control) DRC adds or removes a degree of compensation for the differences in the dynamic range between radio stations. 1 Press to access the sub-menus. 2 Press / repeatedly to select an option. (The asterisk behind the option indicates the current setting.) • [DRC off]: No compensation applied. • [DRC low]: Medium compensation applied. • [DRC high]: Maximum compensation applied. 3 Press to confirm the option. Remove invalid stations Some stations in the list have no ser vice when you travel to another area. In front of the station name of an invalid station, a question mark (?) is displayed. 1 Press to access the sub-menus. 2 Press / repeatedly to select an option. • [No]: Return to the previous menu. • [Yes]: Remove invalid stations from the station list. 3 Press to confirm the option. System menus 1 2 Press Press / to access system menus. repeatedly to select a submenu. • For details, refer to the section 'Use system menus'. EN 8 Play audio via Bluetooth With this product, you can stream audio from a Bluetooth player. An application Philips DigitalRadio is available on Apple App Store and Google Play. To fully enjoy features of this product, download and install the application to your smar t device. Note • Philips does not guarantee the compatibility with all Bluetooth devices. • Before pairing a device with this system, read its user manual for Bluetooth compatibility. • The product can memorize a maximum of 4 paired devices. • Make sure that Bluetooth function is enabled on your device, and your device is set as visible to all other Bluetooth devices. • The operational range between this system and a Bluetooth device is approximately 10 meters (30 feet). • Any obstacle between this system and a Bluetooth device can reduce the operational range. • Keep away from any other electronic device that may cause interference. Switch to Bluetooth mode Press SOURCE repeatedly until [Bluetooth Mode] is displayed. » If no Bluetooth device is connected, [Bluetooth No Connection] (No Bluetooth connection) scrolls. Connect a device 1 On your device, search for Bluetooth devices. 2 In the device list, select ORT2300. • If a message prompts for the permission for Bluetooth connection with ORT2300, confirm it. » If the connection succeeds, [BT Connected] is displayed on the LCD display of this product. Bluetooth indicator The LED indicator beside the power and volume knob indicates the status of Bluetooth connection. Indicator Bluetooth connection Off Waiting for connection Blinking Connecting Solid Connected Disconnect a device • On this product, press and hold for 3 seconds. • On your device, break the Bluetooth connection with this product. Reconnect a device • For a paired Bluetooth device on which the automatic reconnection is enabled, this product reconnects with it once it is detected. • For a paired Bluetooth device that does not suppor t the automatic reconnection, reconnect it with this product manually. EN 15 Control play If the connected Bluetooth device suppor ts Advanced Audio Distribution Profile (A2DP), you can listen to tracks that are stored on the device through the system. If the device also suppor ts Audio Video Remote Control Profile (AVRCP) profile, you can control play on this product. 1 Play a track on the connected device. 2 Control play on this product. • To pause or resume play, press PRESET/ . • To skip to the previous or next track, press / . • To display available information about the current track, press repeatedly. Note • If the connected device does not suppor t the AVRCP profil...