Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Write the numbers here: Model No. __________________________ Serial No. ___________________________ Install batteries Note • You can only use AC power as power supply. Batteries (not supplied) are for backup purpose. 2 x AA 2 x AA EN 1 Open the batter y compar tment. 2 Inser t 2 x AA size batteries with correct polarity (+/-) as indicated. 3 Close the batter y compar tment. Caution • Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. • Risk of decreased batter y life! Never mix different brands or types of batteries. • Risk of product damage! When the remote control is not used for long periods, remove the batteries. Set time and date 1 In standby mode, press and hold SET TIME for 3 seconds. » [24H /12H] begins to blink, and you can hear a beep. 2 Press TUNING + or TUNING -to select the 12/24 hour format. 3 Press OK to confirm. » 0:00 will display, and the hour digits begin to blink. 4 Press TUNING +/ TUNING -to set the hour. 5 Press OK to confirm. » The minute digits begin to blink. 6 Repeat steps 4-5 to set the minute, day, month and year. Tip • In 12 hour format, [MONTH--DAY] is displayed. • in 24 hour format, [DAY--MONTH] is displayed. Note • When iPod/iPhone/iPad is connected, the clock radio synchronizes time from the iPod/iPhone/iPad automatically. Turn on 1 Press POWER. » The unit switches to the last selected source. Switch to standby 1 Press POWER again to switch the unit to standby mode. » The time and date (if set) appear on the display panel. Select source 1 Press SOURCE repeatedly to select from DOCK, FM and AUDIO IN. EN 4 Play Play from iPod/iPhone/iPad You can enjoy audio from iPod/iPhone/iPad through this unit. Compatible iPod/iPhone/iPad The unit suppor ts the following iPod, iPhone, and iPad models: Made for : • iPod nano (7th generation) • iPod touch (5th generation) • iPhone 5 • iPad (4th generation) • iPad Mini Listen to the iPod/iPhone/iPad 1 Press SOURCE repeatedly to select dock mode. 2 Press DOCK key to select dock source. 3 Place the iPhone/iPod/iPad into the dock. • To pause/resume play, press OK/ . • To skip to a track, press / . • To search during play, press and hold / or PRESET +/PRESET -, then release to resume normal play. • To go back to the previous iPod/ iPhone menu, press MENU. • To scroll through the menu, press TUNING +/TUNING -. • To confirm a selection, press OK/ . Charge the iPod/iPhone/iPad When the unit is connected to power, the docked iPod/iPhone/iPad begins to charge. Tip • For cer tain iPod models, it may take up to a minute before the charging indication appears. Play from an external device You can also listen to an external audio device through this unit. 1 Press AUDIO IN to select the AUDIO IN source. 2 Connect the MP3 link cable (not supplied) to: • the AUDIO IN jack (3.5mm) on the back of the unit. • the headphone jack on an external device. » The screen slide shows [AUDIO IN]; and show date and time. 3 Star t to play the device (see the device user manual). EN 5 Listen to radio Note • Only FM radio reception is available on this unit. Tune to a radio station Tip • Position the antenna as far as possible from TV,VCR or other radiation source. • For optimal reception, fully extend and adjust the position of the antenna. • [STEREO] is default setting for tuner mode. • Under tuner mode, you can press OK repeatedly to toggle between [STEREO] and [MONO], and the unit memorizes your setting even if you turn off the unit or turn to other sources. 1 Press SOURCE repeatedly to select FM mode. 2 Press and hold TUNING +/TUNING - for more than 3 seconds. » The radio tunes to next station with strong reception automatically. 3 Repeat step 2 to tune to more stations. • To tune to a weak station, press TUNING +/TUNING - repeatedly until you find optimal reception. Program radio stations Radio station preset allows you to save radio stations, and quickly tune to a favorite station. Note • The preset list can store up to 20 stations. • If the preset list is fully occupied, the screen will show PR 20. • If saving a radio station to a position that has already been occupied, the original radio station will be replaced. Program radio stations manually 1 Press SOURCE repeatedly to enter the FM mode. 2 Press TUNING +/TUNING -to tune to a radio station. 3 Press PROG/SCAN . » A preset list position number flashes. 4 Press OK to save current radio station to the selected position. Tip • Press PRESET +/PRESET -to change the position to save a radio station. Program radio stations automatically 1 Press SOURCE repeatedly to enter the FM mode. 2 Press and hold PROG/SCAN for at least 3 seconds. » The screen displays [AUTO] (auto); » The unit star ts to scan for all available radio stations automatically, and stores them to the preset list. 3 Wait until the auto scan finishes. » The first station in the preset list broadcasts automatically. Select a preset radio station 1 Press / to select a preset number. EN 6 Other features Set the ...