Votes - 0, Average rating: 0
(
)
)
|
manual abstract
1 In standby mode, press TIME ZONE. » The current time zone number blinks on the display panel. 2 Press TIME ZONE repeatedly to select time zone (-1 to +12 adjustable). For Europe: Western European Time ( WET ) +0 Central European Time (CET ) +1 (Default) Eastern European Time (EET ) +2 Moscow Standard Time (MST ) +3 Set clock E In standby mode, you can set clock manually. Select DST (daylight saving time) mode For countries with daylight saving time (DST), the clock radio offers you DST option to adjust summer time. In standby mode, press and hold 12/24H·DST for two seconds. » The clock advances by one hour. Tip • To exit DST mode, repeat the above operation. • To select 12/24 hour format, press 12 /24H· DST repeatedly. Listen to FM radio Tune to FM radio stations F Note • Position the antenna as far as possible from T V, VCR , or other radiation source. • For optimal reception, fully ex tend and adjust the position of the antenna. Note • To turn on/off radio, press R ADIO. Store FM radio stations automatically You can store up to 20 FM radio stations. 1 Press R ADIO to turn on the radio. 2 Press and hold PROG for two seconds. » The clock radio stores all the available FM radio stations and broadcasts the first available station automatically. Store FM radio stations manually 1 Tune to an FM radio station. 2 Press PROG. » The preset number begins to blink. 3 Press PRESET +/- or TUNING +/- repeatedly to select a number. 4 Press PROG again to confirm. 5 Repeat Steps 1 to 4 to store other stations. Note • To remove a pre-stored station, store another station in its place. Select a preset radio station In tuner mode, press PRESET +/- to select a preset number. Adjust volume G Set alarm timer Set alarm time H In standby mode, you can set two alarms to ring at different time. Select alarm sound For the alarm sound, you can select buzzer, your last heard radio, or the melody stored in the clock radio. Adjust AL1/RADIO·BUZZ· 1 or AL2/RADIO·BUZZ· 2 to select alarm sound for Alarm 1/Alarm 2. Activate/deactivate alarm timer I 1 Press AL1/AL2 to view alarm settings. 2 Press AL1/AL2 again to activate or deactivate the alarm timer. » AL1 or AL2 appears if alarm timer is on and disappears if it is off. • To stop alarm, press the corresponding AL1/AL2 (or RADIO). • The alarm repeats ringing for the nex t day. Note • When alarm sounds, you cannot adjust volume by rotating VOL . Snooze alarm When alarm sounds, press SNOOZE. » The alarm snoozes and repeats ringing five minutes later. To adjust alarm inter val (in minutes), press SNOOZE repeatedly. 5 10 15 20 25 30 6 Other features Set sleep timer This clock radio can switch to standby mode automatically after a preset period. Press SLEEP repeatedly to select the sleep timer period (in minutes). » When the sleep timer is activated, appears. To deactivate the sleep timer, press SLEEP repeatedly until [OFF] (off) appears. 15 30 60 90 120 OFF Project time onto wall/ceiling J By projecting time onto a wall or ceiling, this clock radio offers you a unique way to read time in the dark. Warning • Risk of damage to eyes! Do not look at the glowing red light constantly. Note • Before you star t, switch CLOCK/SET AL1/SET AL2/SET TIME to CLOCK. 1 Press PROJECTION to turn on the projector. 2 Rotate the projector to adjust the projected direction. 3 Rotate the focus ring to adjust the image sharpness. 4 To reverse the projected image, switch FLIP to left or right. Tip • To turn off the projector, press PROJECTION again. Adjust display brightness Press BRIGHTNESS repeatedly to select different brightness levels: high, mid, and low. Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 0.6W RMS Tuner Tuning Range FM: 87.5 -108 MHz Sensitivity -Mono, 26dB S/N Ratio FM: <22 dBu Search Selectivity FM: <28 dBu Total Harmonic Distor tion FM: <3% Signal to Noise Ratio FM: >45 dB General information AC power 100-240 V~, 50/60Hz Operation Power Consumption <3W Standby Power Consumption <1W Dimensions -Main Unit ( W x H x D) 135 x 135 x 60.5 mm Weight -With Packing0.6 kg - Main Unit 0.3 kg Troubleshooting Warning • Never remove the casing of this clock radio. To keep the warranty valid, never tr y to repair the clock radio yourself. If you encounter problems when using this clock radio, check the following points before requesting ser vice. If the problem remains unsolved, go to the Philips web site (t). When you contact Philips, ensure that the clock radio is nearby and the model number and serial number are available. No response from the unit • Disconnect and reconnect the AC power plug, then turn on the unit again. Poor radio reception • Increase the distance between the unit and your TV or VCR. • Fully extend the FM antenna. Notice This product complies with the radio interference requirements of the European Community. Any changes or modifications made to this device that are not expressly ap...