Votes - 2, Average rating: 3 ( )

Manafacture: Casio File size: 822.11 kb File name: Language of manual:

•Radio interference can make signal reception impossible. •Strong electrostatic charge can result in the wrong time being set. USING THE CLOCK 1 This clock can receive the time calibration signals transmitted from Mainflingen, Germany and Rugby, England. It automatically selects reception from the transmitter whose signal is strongest. Any of the following procedures can be used to set current date and time. •Auto receive of the time calibration signal •Manual receive of the time calibration signal •Manual setting without using the time calibration signal Auto Receive •This clock performs a 1-minute receive operation each hour. •A signal receive operation takes from two to fourteen minutes under good signal conditions. •As the clock receives a time calibration signal, current signal strength is indicated by the receive indicator, which is a horizontal line above the current time. •A longer receive indicator line means better signal reception. Antenna Icon The antenna icon appears when at least one signal receive operation is successful during a day. The antenna icon is cleared at 2 a.m. and 3 a.m. each day, and will reappear as soon as a subsequent signal receive operation is successful. Wave OK Indicator The Wave OK indicator is displayed when there has been a successful receive operation within the last hour. This indicator disappears at the top of each hour, or when you perform a manual receive operation. Unsuccessful Signal Reception The antenna icon disappears from the display if no signal receive operation is successful during a continuous 24-hour period. If this happens, try changing the position or orientation of the clock, and press the WAVE button (8) to receive again. Manual Receive •Press the WAVE button (8) to start a calibration signal receive operation. •Use the WAVE button (8) to perform a receive operation after replacing the clock’s batteries or if the auto receive operation was not performed correctly for some reason. •The antenna icon appears when signal reception triggered by the WAVE button (8) is successful. Important! •Do not perform any button or switch operation while a signal receive operation is in progress. •The time calibration signal includes both Standard Time and Daylight Saving Time (summer time) data. •The DST indicator appears on the display when Daylight Saving Time (summer time) data is received. •Note that Daylight Saving Time (summer time) is turned on and off in accordance with the received time calibration signal only. You cannot turn it on or off manually. Rugby Mainflingen 1,800 kilometers Inside, among buildings, or near neon signs Inside a vehicle Near refrigerators or other household appliances, near office equipment, mobile phones or wireless LAN devices. Near a construction site, airport, or other sources of electrical noise, underground or in tunnels, near railroads, highways, or radio stations with interfering frequencies. Near high-tensi...

Download now

Please, enter two numbers from picture: