Votes - 4, Average rating: 4 ( )

Manafacture: Citizen File size: 389.29 kb File name: f3f2bb58-6c03-403c-ad06-dd594c39f7b9.pdf Language of manual:

No. C20., C480, T011 • INSTRUCTION MANUAL CTZ-6751 1. SELECTING BASIC FUNCTIONS Press M button to select functions. TIME ALARM STOPWATCH CALENDAR • Alarm, Stopwatch and calendar modes are indicated by each flashing mode mark. • Crown – Analog display set, – Mode change, Instant manual return M – Selection, Reset, Split S – Adjustment, Start, Stop, Alarm Set, R Illumination The Cal. C20. doesn’t have any STOPWATCH or CALENDAR mode mark. 2. ADJUSTING THE ANALOG DISPLAY Pull out the crown one step and turn clockwise or counterclockwise direction to adjust the analog time display. The seconds hand will start timekeeping synchronising with the digital time display when the crown is returned to the original position. 3. ADJUSTING THE DIGITAL TIME DISPLAY TIME TIME SECONDS MINUTES HOURS 12/24 HOURS 1. Press button to set to M the normal TIME display 2. Press button until S SECONDS start flashing. 3. Press to set seconds to R “00”. 4. Press for MINUTES S adjustment. MINUTES start flashing. 5. Press and adjust the R minutes. 6. Press for Hours S adjustment. HOURS start flashing. 7. Press and adjust the R hours. 8. Press for 12/24 HOURS S selection. 12/24 HOURS starts flashing. 9. Press and select 12 or R 24-HOUR display. 10. Press or to finalise SM adjustment. The watch returns to the normal TIME display. • If the watch is left in the adjustment mode for about one minute without operating any buttons, AUTO RETURN will activate to return to the normal TIME display. • If seconds adjustment is made when the SECOND display is showing 30-59 seconds, the MINUTE display will automatically advance to the next minute. • INSTANT MANUAL RETURN to the normal time display can be made at any stage of adjustment by pressing button. M • A and P marks display only under the 12-hour time system. 4. SETTING AND USING THE ALARM • The setting procedure of the ALARM time is the same as that of the TIME display. Setting order is as follows: ALARM•HOURSMINUTES • The HOURS display will synchronise with the selection of 12 or 24 HOURS in the TIME adjustment. • If the watch is left in the adjustment mode for more than 1 minute without operating any button, AUTO RETURN will activate to return to the normal ALARM display. • INSTANT MANUAL RETURN to the normal ALARM display can be made at any stage of adjustment by pressing button. M • Press button in the normal ALARM mode to set R “ON” or “OFF” the alarm. The ALARM set mark will be indicated. • ALARM sounds for 20 seconds at the ALARM set time. Alarm buzzer can be ceased by pressing any button. 5. USING THE STOPWATCH Stopwatch operation diagram • Confirmation sound will be made each time or S button is pressed in the STOPWATCH mode. R • The SPLIT COUNTER mode will turn into the STOPWATCH COUNTER mode when it is changed to the other mode while it is in operation. • The TIMEKEEPING of the stopwatch will be turned off, if the ALARM buzzer is stopped by pressing S or button when the watch is in the STOPWATCH R COUNTER or SPLIT COUNTER mode. While the split display is in use the SPLIT mark or S mark is displayed. SPLIT TIME measures the time elapsed after starting the split time function. • The stopwatch measurement capacity is 60 minutes, from 0 to 59' 59.99". 6. ADJUSTING THE CALENDAR CALENDAR DATE MONTH DAY 1. Press M button to set to the normal CALENDAR display. 2. Press until DATE starts S flashing. 3. Press and adjust theR date. 4. Press for MONTHS adjustment. MONTH starts flashing. 5. Press and adjust theR month. 6. Press for DAY S adjustment. DAY starts flashing. 7. Press and adjust theR day. 8. Press or to finaliseSM adjustment. The watch returns to the normal CALENDAR display. • INSTANT MANUAL RETURN and AUTO RETURN system will activate in the same manner as described in the TIME adjustment. • If non-existent date is set, the CALENDAR display will show the 1st day of the next month when returned to the normal display. (ex: February.31 March 1) • The CALENDAR function includes automatic month-end adjustment, but in the leap year changeover for February to March must be made manuall...

Download now

Please, enter two numbers from picture: