Votes - 0, Average rating: 0 ( )

Manafacture: Philips File size: 187.56 kb File name: Language of manual:

Description 1) On/Off switch (I/O) 6) Base 2) Pilot lamp 7) Scale filter 3) Safety lid 8) Double-action filter 4) Spout 9) Triple-action filter 5) Water-level indicator 10) Filter Important . This kettle is only meant to be used for boiling water. . Never fill the kettle beyond the maximum level indication. If the kettle has been overfilled, there is a risk that boiling water will be ejected from the spout. . Never fill the kettle below the minimum level. In case of kettles with a flat heating element: never put less than 0.1 litre of water in the kettle to prevent the kettle from boiling dry. In case of kettles with a spiral heating element: never put less than 0.4 litre of water in the kettle, unless the water-level indicator indicates a different minimal water-level . In case of metal kettles: never put less than 0.2 litre of water in the kettle. . Some condensation may appear on the base of the kettle.This is perfectly normal and does not mean that the kettle has any defects. . Depending on the hardness of the water in your area, small spots may appear on the heating element of your kettle when you use it.This phenomenon is the result of scale build-up on the heating element and on the inside of the kettle over time.The harder the water, the faster scale will build up. Scale can occur in different colours. Although scale is harmless, too much scale can influence the performance of your kettle. Please follow the instructions for descaling the kettle given in this leaflet. . 3100 watts kettle:This Philips rapid boil kettle can draw up to 13 amps from the power supply in your home. Make sure that the electrical system in your home and the circuit to which the kettle is connected can cope with this level of power consumption. Do not let too many other appliances draw power from the same circuit while the kettle is being used. . Keep the kettle and the cord out of the reach of children. . Excess cord can be stored in or around the base of the kettle. . Boiling water can cause serious burns. Please take care when the kettle contains hot water. . Directly removing the lid after brewing can cause hot steam coming out of the kettle. . Only use the kettle in combination with its original base. . If your kettle is damaged in any way, please contact a service centre authorised by Philips. Do not attempt to make any repairs yourself. Boil-dry protection The heating element of your kettle is protected by a safety cut-out device.This device will automatically switch the kettle off if it is accidentally switched on without any water or with insufficient water. The on/off switch will stay in the 'I' position and the pilot light, if available, will stay on. Please switch the kettle off and wait 10 minutes for the kettle to cool down. Then lift the kettle from its base to reset the boil-dr y protection.The kettle is ready for use again. Using the kettle 1 Place the kettle base on a flat surface and put the plug in the wall socket. 2 Fill the kettle with water e...

Download now

Please, enter two numbers from picture: