Login:
Votes - 2, Average rating: 4.5 ( )

User manual Vitek, model VT-1111

Manafacture: Vitek
File size: 338.44 kb
File name: Vitek-VT-1111-Pdf-Rus.Pdf
Language of manual:ruen
Free link for this manual available at the bottom of the page



Other manuals for this model:
Кettles - VT-1111 (664.15 kb)

manual abstract


Вишневского, 14 (8432) 38-31-37/07 32. Таганрог КРИСТИ ул. Фрунзе, 45 (8634) 46-47-54 33. Ижевск Радиокомплект ул. 9-я Подлесская, 25 (3412)59-28-05 34. Барнаул Vitek - сервис ул. Попова, 68 (3852) 35-37-50 35-37-51 35. Новосибирск ООО "Техмастер” ул. Болыиевитская, 131 (3832) 12-54-00 36. Омск Космос Космический пр-т, 97А, к.4 (3919) 53-98-41 Получить информацию о других сервисных центрах Вы можете у продавца или по адресу в Интернет: 10 ENGLISH IMPORTANT SAFEGUARDS Read ill instructions • Do not touch hot surfaces. Use handles or knobs. • To protect against fire, electric shock and personal injury do not immerse cord, plugs or kettle in water or other liquid. 1 Close supervision is necessary when any appliance is used by or near children. • Unplug from outlet when not in use and before cleaning. Allow to coolbefore putting on or taking off parts and before cleaning the appliance. • Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Note: If the mains lead is damaged, the cordless base should be returned to the manufacturer for repair • The use of accessory attachments not recommended by die appliance manufacturer may result in fire, electric shock or personal injury. • Do not use outdoors. • Do not let cord hang over edge of able counter or touchhot surfaces. • Do not place on or near a hot gas or electric burner or in a heated overt. • Disconnect the kettle from the mains supply when filing or pouring. • Boil only as much water as you need as this saves electricity. • Always close the lid securely before switching on - otherwise the kettle will not switch off automatically and it may spit out boiling water. For kettles with locking lids ensure lid is locked correctly. • Do not remove the lid while the water is boiling • Always take care to pour boiling water slowly and carefully without tipping the kettle too fast • Always put in enough water to cover the bottom of the kettle. • Ensure that the kettle is used on i firm, flat surface. • Avoid contact with steam from the spout when the water is boiling or just alter it has switched off. TAKE CARE IF OPENING THE LID FOR RE-FILLING WHEN THE KETTLE IS HOT. • Do not fill above the MAX mark cm the water level gauge. WARNING: DO NOT IMMERSE THE KETTLE OR BASE IN WATER. WARNING: IF THIS KETTLE IS OVERFILLED BOILING WATER MAYBE EJECTED. DO NOT TIP KETTLE BACKWARDS AS B01UNG WATER MAY BE EJECTED. • Do not hold the switch in the ON position or tamper with the switch to fix it in the ON position as this may cause steam to be ejected from around the lid and could damage the automatic switch-off mechanism. • Do not attempt to connect any other appliance to the cordless base unit, or tamper with the connector in any way (special interlocked shutters are designed to prevent access to the live pins until the kettle is attached to the base unit). • Do not use abrasive cleaners on the outside of the kettle - these may scratch the surface. • Do not use the kettle for any use other than to bail water. • Extreme caution must be used when moving an appliance containing hot water. • Always attach plus to appliance first, then plug into the wall outlet To disconnect, turn any control to off, then remove plug from wall socket. WARNING: DO NOT PLACETHE BASE UNIT ONTO A METALTRAYOR METAL SURFACE 3 WHILST IN USE. SAVE THESE INSTRUCTIONS ELECTRICAL REQUIREMENTS Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply, which must be A.C. (Alternating Current). Mains lead length The correct length of lead should reach from the socket to the base unit without straining the connections. Reduce the length of the lead by storing the excess on the cord storage facility in the base unit. Do not allow a loop of lead to lie on or hang over the edge of the work surface. For appliances supplied with fitted plug If the socket outlets in four home are not suitable for the plug supplied with this appliance, the plug should be removed and the appropriate one fitted, Note: The plug removed from the mains lead, if severed, must be destroyed, as a plug with bared flexible cord is hazardous if engaged into a live socket outlet. WARNING: THIS APPLIANCE MUST BE EARTHED. INSTRUCTIONS FOR USE 1 To fill the kettle press die release button 10 to open the flip top lid. 2 Put in at least enough water to cover the bottom of the kettle but never more than the maximum (MAX). 3 To close the lid, press the rear of the lid until it clicks. Do not operate the kettle with the lid open or removed. Do not operate without the spout filter in position. 4 Place kettle on the base unit, engaging the 360° base unit connector. The rotary type base unit allows you to place the kettle in any convenient position. 5 Plug in and switch on at the wall socket. 6 Lift the switch lever 7 to switch on, the neon ON light will illu...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category