Votes - 4, Average rating: 3.8
(
)
)
|
Photos and specs Viconte VC-321 |
manual abstract
Вылейте воду. Прибор готов к использованию. ИСПОЛЬЗОВАНИЕ ПРИБОРА УСТАНОВКА ФИЛЬТРА • Откройте крышку чайника, нажав на кнопку/ • Установите фильтр в пазы, находящиеся внутри носика. • Убедитесь, что фильтр установлен правильно. ВНИМАНИЕ: Не оставляйте незакрепленный фильтр внутри чайника. Перед удалением фильтра дождитесь, пока вода полностью остынет. НАПОЛНЕНИЕ • Снимите корпус прибора с базы питания. • Вы можете наполнить чайник водой через носик или открыть крышку. • Не наполняйте чайник водой меньше 0,5 литра (ниже отметки "МИМ"), чтобы избежать перегревания прибора. • Не наполняйте чайник больше 1.7 литра (выше отметки "МАХ"), иначе вода может выплеснуться через носик прибора во время кипения. • Keep the appliance away from children. • Use the kettle only with the base unit supplied, and do not use the base unit for any other purposes. • Never remove the kettle from its base unit while in operation. Switch the appliance off first. • Take care to close the lid properly before switching on, Otherwise, the appliance will not switch off automatically and hot water may overflow. • The kettle is intended for water heating only, and is not to be used for any other liquids. _BEFORE USE_ • Remove all packing material from the kettle. • Before connecting of the kettle check that voltage indicated on the rating label corresponds the mains voltage in your home. • Place the filter. • Fill the kettle with cool water up to the "MAX" mark and boil it. Empty the kettle. The appliance is ready for use. _INSTRUCTION FOR USE_ FILTER PLACING • Open the lid by pressing on the lid open button. • Place the filter between the two grooves near the spout at the front of the kettle. • Ensure that the filter is pressed down to the bottom of the grooves and fits correctly then close the lid. NOTE: Never leave the filter loose in the kettle. Never remove the filter while the kettle contains hot water. FILLING • Remove the kettle from the base unit. • You can fill the kettle with water via the spout or opening the lid. • Do not fill with less than 0.5 liters of water (below to "MIN" mark) to prevent the heating element running dry while operating. • Do not fill with more than 1.7 liters of water (up to "MAX" mark). Avoid overfilling to prevent the water spilling out during the boiling process. SWITCHING ON • After filling your kettle with water, place the kettle on the base unit. • Connect plug to power supply and press On/Off switch. The appliance will begin to operate and the inner indicator light will come on. SWITCHING OFF • When the water boils, the kettle will switch off automatically and the indicator light will go off. NOTE: This appliance has a safety system, which automatically switches off the heating element if the appliance is inadvertently switched when empty, or if it boils dry. In this case, let the appliance cool down completely, before filling with water again. SWITCHING ON AGAIN • The kettle can be switched on ag...