1 1 Check that the unit is in the normal play TRACK 2 2 mode. ! Press the RANDOM key. CD-206/DPF-R6010 During track selection: ”>“ and ”<“ move from the outside to the inside. <<><<21>><>> C The number here changes. RNDM 05 In case track No. 5 is selected CD-204/203/DPF-R4010/R3010 Blinks 2019181716 1514131211 109876 54321 TRACK NO. DISCRANDOM 54321 4During random track selection To select another track during random play RANDOM RANDOM 54321 5 DISC SINGLE TRACK NO. 405 012 : OEach time a track e

CD-204/203/DPF-R4010/R3010 P.C. indicator light up. P.C. 5 TRACK NO. AFILE4 DISC NO. During normal EDIT: OWhen the CHECK key is pressed, the track Nos. of edited songs will automatically be displayed in the order they are edited. During MULTI EDIT: OEvery time the CHECK key is pressed, the track Nos. are displayed in the edited order. Playing or recording the edited contents 6 To clear the edited contents Press any one of these keys. Do this operation in the stop mode. During MULTI EDIT: P.MODE

Hereafter the illustration of the common parts on the front panel is of CD-206/DPF-R6010. : Keys and controls used in the operations described on this page. Loading/unloading discs 1 1 Load/unload a disc. Close the tray. Label side Disc tray 2Place/remove a disc. 3When loading or unloading other discs 0DISC SKIP 1Open the tray. 2 0 ODo not touch the played side of disc. OLoading two discs together will cause malfunctioning. OPlace the disc properly along the groove on the tray. (If the disc is n

MODE ° DISC SKIP 5 SET 1Press the MODE key. 2Select “MUSIC TYPE”. 3Set the input. 2Select the music type. ° DISC SKIP 5 Previous file Next file 3Start playback. 6 : Keys and controls used in the operations described on this page. OWhen the MODE key is pressed during MUSIC TYPE mode, the MUSIC TYPE mode is cancelled. Each press switches the modes as follows: 1 MUSIC TYPE 2 TITLE INPUT 3 ALL DATA READ 4 ALL INFORMATION UMISCYTEP OPress repeatedly until the desired music type is displayed. When “Ro

. OWhen the SET key is pressed, one character is set and the cursor goes to the next digit. ORepeat this to enter the title name. OOne character is set and the cursor goes to the next digit. OInput the entire disc title by repeating 2 and 3 for each character. ITLTETSRO!E! OTo register the disc names of another disc, repeat the entire procedure of "To enter the disc title". OTo register another track titles in the same disc, go to step 1-2 in “To enter the track title“. . Registration of Title N

Except for USA and Canada CD-404/403 DPF-R4030/R3030 Standby mode While the standby indicator of the unit is lit, a small amount of current is flowing into the unit’s internal circuitry to back up the memory. This condition is referred to as the standby mode of the unit. While the unit is in the standby mode, it can be turned ON from the remote control unit. Controls and indicators The keys with the same name as those on the remote control unit operate the same way as the remote control unit. 1

or DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC SKIP indicator " DISC 2 DISC 3 " goes off. DISC 1 DISC 4 DISC 5 Blinks during playback. CD-404/403/DPF-R4030/R3030 If there is no disc in the selected disc tray, the corresponding indicator " " goes off. 54321 TRACK NO. DISC 109876 54321 SINGLE NO. OPlayback starts from the disc selected in order of the DISC No. OWhen the 3/8key is pressed without selecting a disc, playback starts from the indicated DISC No. CD-406/DPF-R6030 Lights up. Track NO. being E

Be specially careful not to use contact cleaners containing oil, for they may deform the plastic component. Condensation (of dew) may occur inside the unit when there is a great difference in temperature between this unit and the outside. This unit may not function properly if condensation occurs. In this case, leave the unit for a few hours with the power left ON, and restart the operation after the condensation has dride up. Be specially cautious against condensation in a following circumsatan

OWhen the door panel is closed. OWhen the title input mode is exited while the door panel is closed. The display flashes. DSICERDANIG When there are discs for which the disc information already has been read in, there may be no display. Do not move or exchange discs until the disc information has been read in. 3 3 Enter the disc title. 4Store the disc title. RANDOM DISPLAY 32 4 CONFIRM REPEAT 1 76 85 +100 +1009 ( ) A B C D E F G BEST SELECTION H I J K L M N O P Q R S T U V X Y Z W /.– SELECTOR '

10-key Remote The buttons with the same name as those on the main unit operate the same way as on the main unit. The buttons marked * are provided only on the remote control unit. REMOTE CONTROL UNIT RC-P0714 T U V X Y Z W /. SPACE CHARAC.DELETE – SELECTOR ( ' DISC SKIP ) MODE SET /CLEAR /CHECK /P.MODE POWER DISC DOWN UP 7 ENTER 6 CURSOR 4 . 1 A DOWN UPLEFT RIGHT CHARACTER RANDOM DISPLAY CONFIRM A B C D E F G REPEAT BEST SELECTION 32 4 H J K L M N O P Q R S 1 76 85 +100 +1009 I Model : RC-P0714