• Avoid using or storing this unit in dusty or sandy locations. 4 Dear Customer: Selectingfineaudioequipmentsuchastheunityou’vejustpurchasedisonlythestartofyour musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at asafelevel. Onethatletsthesoundcomethroughloudandclearwithoutannoyingblari

The “pregrooved” disc is necessary in order to provide the recorder with a physical reference. The groove also contains timing information that the recorder uses to keep the CD spinning at the correct speed at all points along the disc surface. After the polycarbonate substrate is molded, the disc is spin-coated with the recording layer, an organic dye such as cyanine, phthalocyanine, or azo. The recording layer is then coated with a vacuum-deposited reflective layer, followed by a spin coat of

All Rights Reserved. Nickelodeon, Nick Jr., Nicktronics, Dora the Explorer and all related titles, characters and logos are trademarks of Viacom International Inc. 31/3/2005, 15:41 WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. This device complies with part 15 of the FCC rules. Operation is subject to thecondition that this device does not cause harmful interference. CLASS 1 LASER PRODUCTCLASS 1 LASER PRODUCTAPPAREIL c LASER DE CLASSE 1PRODUCTO LASER DE C

MHzFM POP MEMORYCH STEREO MHzFM POP CH STEREO 4.) The unit can store up to 20 FM stations, 20 AM stations. TUNING TO A PRESET STATION Select the desired station preset number by pressing the REPEAT / MEMORY UP button. 8 ES27_ib_drafts.p65 8 19/3/2002, 16:09 ANTENNA FM For FM reception there is a built-in 3 ft FM antenna wire at the rear of the unit. Unravel the wire and move it around to obtain the best reception. AM This system includes an external AM Loop antenna. Assemble the AM loop antenna

• Remove any labels or stickers which may be on the front or top of the set, but do not remove any labels from the back or bottom. • We suggest that you retain the original carton and packing materials in case it ever becomes necessary to return your unit for service. This is the only sure way to protect the unit from damage in transit. • If you do dispose of the carton and packing materials, please do so properly. Emerson cares about our environment. POWER SOURCE This system is designed to oper

AM 3.) Tune to the desired frequency as follows: • Manual Tuning Repeatedly press the or buttons until the frequency of the desired station appears on the display. • Automatic Tuning Press and hold the or buttons until the display begins to move, then release the buttons. The tuner will search up or down the band for the next strong station and stop on that station. Repeat this procedure until the tuner stops on your desired station. 4.) Adjust the VOLUME and EQ controls as desired. 5.) If you t

5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture (Follow battery manufacturer’s directions.) 5 HD7003_ib040703.p65 5 7/4/2003, 11:15 HAND STRAP INSTALLATION This player is supplied with an accessory hand-strap to secure the player in your hand while you are jogging or performing other strenuous activities. To install the hand-strap, thread the strap through the two slots in the hand strap bracket as shown, and then through the buckle. Adjust the Vel

Press the PLAY/PAUSE button. Playback will resume at the beginning of the last track that was playing before the disc was stopped. To cancel the Auto-Resume function, open the CD door and then close it again while power is still ‘On’. PAUSE CONTROL Press the PLAY/PAUSE button during playback to pause momentarily. The sound stops, the track and the time display flashes but the disc continues to spin. Press the PLAY/PAUSE button again to cancel pause and resume playback. The sound returns and the

NOTE: This optional AC adapter, should be rated as follows: Input : 120V / 60Hz AC. Output : 4.5V DC 500mA. The adapter must have a female-type plug with a positive center: Negative (–) Positive (+) • Be sure the adapter is UL listed. If you use a “Universal”-type adapter, be sure to set the output selector to “DC 4.5V”. •If the AC adapter will not be used for an extended period of time, remove it from the wall outlet by pulling on the adapter housing. Do not remove the adapter by pulling on the

"PROG" indicator and Program No. "P -01" appears. 2.) Press or button until the first track to be programmed appears in the display. Example: Track # 7. 3.) Press the MEMORY button again to enter the selected track in the memory. The track indicator returns to a "00" and the Program No. advances to "P -02". 4.) Repeat Steps 2 and 3 until you have entered up to a total of 24 tracks in the memory. 5.) Press the Play/Pause button to begin programmed playback. The “PROG” indicator remains in the dis