Votes - 4, Average rating: 4.8
(
)
)
|
manual abstract
New features include twin transformer power supplies, an improved display (which can be switched off or dimmed) plus a remote control handset which includes volume and direct track access facilities. The Delta 170 CD transport is a top quality CD player without the D/A converters and analogue output stages. It is perhaps analogous to a top quality turntable motor unit to which an arm and cartridge of the user's choice are added. It is simply designed to provide a digital output signal of the highest quality and integrity. The Delta 170 must be used with an outboard D/A converter or with DAC equipped amplifiers or pre-amplifiers. With the exception of the remote control volume facility, the Delta 170 includes all the features found on the Delta 70.2. To obtain the very best performance the Delta 170 also includes a CDMI Mk 2 die cast transport and twin digital outputs (one optical and one co-axial), fed from their own transformers and power supplies. To ensure the best possible isolation from external vibration the Delta 170 comes complete with a set of AudioQuest sorbothane feet. Please study this manual carefully to ensure you get the best results from your CD machine. Remember that your dealer is there to help you. He has a full knowledge of all Arcam products and considerable experience of their use in a variety of systems. If, however, he is unable to answer your query then please do not hesitate to contact us at the factory. Important Notice 1 Prior to installation it is essential to remove the two large metal transit screws which protrude from the base of your machine. 2 These can be safely stored in the holes provided on the back panel of both the Delta 70.2 and the Delta 170. DO NOT transport either machine without re-fitting and tightening up the transit screws. 2 Please retain the carton and all packing materials (including the transit screws) provided with your player so that it may be re-packed correctly if it ever becomes necessary to transport the unit or to return it for service. 3 If servicing is required then the equipment should be fitted with its transit screws, properly packed and returned to the dealer from whom it was purchased. It is essential to include a covering letter, giving your name and address and a brief but thorough description of the fault. Installing and using your Delta 70.2/Delta 170 Mains Supply The Arcam Delta 70.2/Delta 170 may be supplied to work on any of the following a.c. voltages: 240V, 220V, 120V, 110V, 100V. Check that your local mains supply voltage agrees with the voltage setting indicated on the back panel of the player. If not, please contact the factory or your national distributor for details of how to proceed further. A detachable mains lead is supplied with the player. The cores of this lead are coloured in accordance with the following code: Green and Yellow - Earth Blue - Neutral Brown - Live Note: Export units for certain markets have moulded mains plugs fitted as standard. As the colours in the mains lead may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured GREEN AND YELLOW must be connected to the terminal in the plug which is marked by the letter E or to the safety earth symbol or coloured GREEN or GREEN AND YELLOW. The wire which is coloured BLUE must be connected to the terminal which is marked by the letter N or coloured BLACK or BLUE. The wire which is coloured BROWN must be connected to the terminal which is marked by the letter L or coloured RED or BROWN. Fuses If the mains plug is fused fit a 3 amp fuse. All versions of the Delta 70.2 and Delta 170 are fitted with an anti-surge mains fuse, rated at 3 f 5mA for 220/240V players and 630mA for J 00/ II 0/120V players. Should a mains fuse fail, SWITCH OFF THE PLAYER AND DISCONNECT IT AT THE WALL SOCKET. The fuse always remains live when the machine is plugged into the mains. Remove the top plate from the player by unscrewing the two screws at the top of the rear panel using a No 1 ‘Posidriv’ screwdriver. Lift the top plate vertically and pull it backwards slightly to release it. Fit a new fuse of the same type and value in the fuse holder close to the mains inlet. You should find a spare mains fuse in the spares kit provided with the player or, alternatively, fitted inside the machine dose to the mains inlet. If the new fuse fails we recommend that you return the player to your dealer for investigation and possible repair. Interaction with other equipment Although the transformers used in the Delta CD machines have a low and well controlled level of magnetic field radiation it is possible that they may occasionally interfere with nearby sensitive equipment, such as the cartridge inputs of an amplifier or the replay circuitry of a cassette recorder. This interference normally manifests itself as a low level background hum, present when using the appropriate equipment, but which disappears ...
Other models in this manual:CD Players - Delta 170 (471.85 kb)