Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Playing CDs
Recording from CDs
The programme remains until you erase it or turn off
the player
Recording Your Own Programme
If you replace discs, the programmed disc and track
numbers remain. So, the player plays only the existing
You can record the programme you’ve created on a
disc and track numbers. However, the disc and track
tape, etc. The programme can contain up to 32 tracks.
numbers that aren’t found in the player or on the disc are
By inserting a pause during programming, you can
deleted from the programme, and the rest of the
programme is played in the programmed order.
divide the programme into two for recording on both
sides of a tape.
Note
PROGRAM
DISC 1 – 5
·
P
The total playing time doesn’t appear when:
—You have programmed a track whose number exceeds 20.
—The total playing time of the programme exceeds 200
minutes.
Checking the track order
Number buttons
>10
You can check your programme before or after you
start playing.
1 Create your programme (for side A when
recording on a tape) while checking the total
Press CHECK.
playing time indicated in the display.
Each time you press this button, the display shows the
Follow Steps 1 to 4 in “Creating Your Own
track (the disc and track numbers) or the disc (the disc
Programme” on page 11.
number and “AL” indication) of each step in the
The A
indication appears in the display.
programmed order. After the last step in the
programme, the display shows “End” and returns to
2 When you record on both sides of the tape, press
the original display. If you check the order after you
P to insert a pause.
start playing, the display shows only the remaining
The “P” and A B indications appear in the display
steps.
and the playing time is reset to “0.00.”
When you record on one side of the tape, skip this
step and go to Step 4.
Changing the track order
A pause is counted as one track
You can change your programme before you start
You can programme up to 31 tracks when you insert a
playing.
pause.
3 Repeat Steps 2 to 4 in “Creating Your Own
To
Press
Programme” on page 11 to create the programme
Erase a track
CHECK until the track you
for side B.
don’t want appears in the
display, then press CLEAR
4 Start recording on the deck and then press · on
Erase the last track in the
CLEAR. Each time you press
the player.
programme
the button, the last track will
When you record on both sides of the tape, the player
be cleared.
pauses at the end of the programme for side A.
Add tracks to the end of the
DISC 1 – 5 to select the disc,
programme
then number buttons of the
5 When you record on side B, reverse the tape and
tracks to be added
press · or P on the player to resume playing.
Change the whole
CLEAR until “ALL CLr”
programme completely
appears in the display.
Create a new programme
You can check the total playing time while
following the programming
programming (Programme Edit)
procedure.
To select a track, press ≠ or ± and check the total
playing time. Then press PROGRAM to confirm your
selection.
To check and change your programme
See the left column of this page.
A
The
indication appears while checking the
B
programme for side A and
while checking the
programme for side B.
12EN
...