Votes - 0, Average rating: 0 ( )

Manafacture: Philips File size: 2.81 mb File name: Language of manual:

2. Press PROGRAM to activate programming. – Display: PROGRAM flashes. 3. Press PRESET 4 or 3 once or more to allocate a number from 1 to 30 to this station. 4. Press PROGRAM again to confirm the setting. – Display: PROGRAM disappears, the preset number and the frequency of the preset station are shown. 5. Repeat the above four steps to store other stations. • You can overwrite a preset station by storing another frequency in its place. Tuning to preset stations Press PRESET 4 or 3 until the desired preset station is displayed. PLAYING A CD This CD player plays Audio Discs including CD-Recordables and CD-Rewritables. 1. Select CD source. ™ is displayed briefly. 2. Press OPEN•CLOSE to open the CD compartment. ™Display: when you open the CD compartment. 3. Insert a CD with the printed side facing up and press OPEN•CLOSE to close the CD compartment. ™Display: the CD player scans the contents of a CD, and then the total number of tracks and playing time are shown. Display: is shown if you have inserted a non-finalized CD-R(W). 4. Press PLAY•PAUSE 2; (for AZ 2025 model only: on the remote control 2;) to start playback. ™Display: Current track number and elapsed playing time of the track during CD playback. 5. To pause playback press PLAY•PAUSE 2;. Press PLAY•PAUSE 2; again to resume play. ™Display: the elapsed playing time flashes when playback is on pause. 6. To stop CD playback, press STOP 9. Note: CD play will also stop when: – the CD door is opened; – the CD has reached the end (unless you have selected REPEAT or REPEAT ALL); – you select another source: TAPE / TUNER. 8 CD PLAYER Selecting a different track • Press SEARCH . or § on the set, (for AZ 2025 model only: on the remote control . or ™) once or repeatedly until the desired track number appears in the display. • If you have selected a track number shortly after loading a CD or in the PAUSE position, you will need to press PLAY•PAUSE 2; (on the remote control 2;) to start playback. Finding a passage within a track 1. Press and hold down SEARCH . or § (for AZ 2025 model only: on the remote control 5 or 6). ™The CD is played at high speed and low volume. 2. When you recognize the passage you want, release SEARCH . or §. – Normal playback continues. Note: During a CD programme or if SHUFFLE/ REPEAT is active, searching is only possible within a track. Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback. The play modes can also be combined with PROGRAM. SHUFFLE - tracks of the entire CD/ programme are played in random order SHUFFLE and REPEAT ALL - to repeat the entire CD/ programme continuously in random order REPEAT ALL - to repeat the entire CD/ programme REPEAT - to play the current track continuously 1. To select your play mode, press CD MODE on the set (or for AZ 2025 model only: press SHUFFLE or REPEAT on the remote control) before or during playback until the display shows the desired function. 2. Press PLAY•PAUSE 2; to start playback if in the STOP position. 3. To return to normal playback, press the respective SHUFFLE or REPEAT button until the various SHUFFLE/ REPEAT modes are no longer displayed. – You can also press STOP 9 to cancel your play mode. Note: In SHUFFLE mode, the display shows rapid patterns e.g. , when the CD player selects a random track number. BATTLOW English BATTLOW 9 CD PLAYER English Programming track numbers In the STOP position, select and store your CD tracks in the desired sequence. If you like, store any track more than once. Up to 20 tracks can be stored in the memory. 1. Use the SEARCH .or §on the set, (for AZ 2025 model only: on the remote control .or ™) to select your desired track number. 2. Press PROGRAM. ™Display: PROGRAM and the selected track number Prog appears briefly. ™If you attempt to programme without first selecting a track number, no SEL or no Prog scrolls across the display. 3. Repeat steps 1-2 to select and store all desired tracks. ™FULL is displayed if you attempt to programme more than 20 tracks. 4. To start playback of your CD programme, press PLAY•PAUSE 2; (for AZ 2025 model only: on the remote control 2;). Reviewing the programme In the STOP position or during playback, press and hold down PROGRAM for a while until the display shows all your stored track numbers in sequence. Erasing a programme You can erase the programme by: – pressing STOP 9 once in the STOP position or twice during playback. • no Prog scrolls across the display briefly and PROGRAM disappears. – you select another source: TAPE / TUNER. BATTLOW BATTLOW 10 CD PLAYER CASSETTE RECORDER CD player and CD handling • If the CD player cannot read CDs correctly, use a commonly available cleaning CD to clean the lens before taking the set to repair. Other cleaning methods may destroy the lens. • The lens of the CD player should never be touched! • Sudden changes in the surrounding temperature can cause condensation to cloud over on the lens of your CD player. Playing a CD is ...

Download now

Please, enter two numbers from picture: