Votes - 0, Average rating: 0
(
)
)
|
manual abstract
2 Press on main unit to open the tape door. 3 Load the tape with the open side upward and the full spool to the right. 4 Press on main unit to start play. • To pause/resume play, press on main unit . • To rewind or fast-forward, press / on main unit . • To stop play, press . CDUSB FMTAPE / OFFAUDIO IN Tune to FM radio stations Note ••For optimal reception, fully extend and adjust the position of the FM antenna. 1 Switch the source selector to FM. 2 Rotate TUNING to select a station. 3 Repeat step 2 to tune to more stations. CDUSB FMTAPE / OFFAUDIO IN EN 5 Play options Control play In CD mode, you can control play through the following operations. / Press:skip to the previous/next track Hold:search within play, then release to resume play. Start or pause play. Stop play. PROG Program tracks. +VOLUME- Adjust volume. - ALBUM + Skip the the previous or next album. MODE Select a play mode. [ ]: Play the current track repeatedly. [ ]: Play all tracks repeatedly. [ ]: Repeat all tracks randomly. To return to normal play, press MODE repeatedly until the repeat icons disappear. Tip ••Only [ ] and [ ] can be selected when you play the programmed tracks. Program tracks In CD and USB mode, you can program a maximum of 20 tracks. 1 Press to stop playback. 2 Press PROG to activate the program mode. »»[PROG] (program) begin to blink. 3 Press / to select a track number, then press PROG to confirm. 4 Repeat steps 3 to program more tracks. 5 Press to play the programmed tracks. »»During play, [PROG] (program) is displayed. • To erase the program, press twice. Adjust sound During play, you can adjust volume and select the sound effects. Key Function +VOLUME- Increase or decrease volume. DBB Turn dynamic bass enhancement on or off. EN 6 Product information Note ••Product information is subject to change without prior notice. Specifications Amplifier Max Output Power Total 2 W RMS Frequency Response 125 -16000 Hz, -3dB Signal to Noise Ratio >55 dBA Total Harmonic Distortion <1 % Audio-in Input 650 mV RMS Disc Laser Type Semiconductor Disc Diameter 12cm/8cm Support Disc CD-DA, CD-R, CD-RW Audio DAC 24Bits / 44.1kHz Total Harmonic Distortion <1% Frequency Response 125 -16000 Hz, -3dB S/N Ratio >55 dBA Tuner Tuning Range 87.5 - 108MHz Tuning grid 50 kHz Total Harmonic Distortion <3% Signal to Noise Ratio >50 dBA Tape deck Frequency response - Normal tape (type I) 125 - 8000 Hz (8 dB) Signal-to-noise ratio - Normal tape (type I) 35 dBA Wow and flutter . 0.4% DIN General Power supply - AC Power - Battery 220-240V~, 50/60 Hz; 9 V, 6 x 1.5 V type: R14/UM2/C CELL Operation Power Consumption 15 W Standby Power Consumption <0.5 W Dimensions - Main Unit (W x H x D) 299 x 240 x 132 mm Weight (Main Unit) 1.8 kg Maintenance Clean the cabinet • Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Clean discs • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. EN • Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. Clean the disc lens • After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good play quality, clean the disc lens with Philips CD lens cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner. Clean the heads and the tape paths • To ensure good recording and play quality, clean the heads A, the capstan(s) B, and pressure roller(s) C after every 50 hours of tape operation. • Use a cotton swab slightly moistened with cleaning fluid or alcohol. • You can also clean the heads by playing a cleaning tape once. Demagnetise the heads • Use a demagnetising tape available at your dealer. 7 Troubleshooting Warning ••Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available. No power • Ensure that the Mains cord is connected securely. • Ensure that there is power at the AC Mains. • Ensure that the batteries are inserted correctly. No sound or poor sound ••Adjust the volume. No response from the unit ••Disconnect and reconnect the AC power plug, then turn on the system again. ••As a power-saving feature, the unit switches off automatically 15 minutes after track play reaches the end and no control is operated. Poor cassette sound quality • Ensure that heads in the cassette holder are clean. • Ensure that a NORMAL (IECI) cassette tape is used for record. Cassette does not work for record • Ensure that cassette tabs are not broken. No disc detected ••Insert a disc. ••Check if the disc is inserted upside down. ••Wait until the mois...