Votes - 0, Average rating: 0
(
)
)
|
manual abstract
• Erase a program. • i SOURCE EN 9 3 Get started Caution • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your apparatus.The model number and serial number are on the bottom of your apparatus. Write the numbers here: Model No. ____________________________ Serial No. _____________________________ Install batteries Note • You can use both batteries and AC power as power supply of this apparatus. • Batteries are not supplied with the accessories. 1 Open the batter y compar tment. 2 Inser t 8 batteries (type: R-20, UM-1 or D-cells) with correct polarity (+/-) as indicated. 3 Close the batter y compar tment. ( 3 ) Prepare the remote control Caution • Risk of explosion! Keep bat teries away from heat, sunshine or fire. Never discard batteries in fire. • Risk of decreased batter y life! Never mix different brands or types of batteries. • Risk of product damage! When the remote control is not used for long periods, remove the batteries. For fi rst-time use: 1 Remove the protective tab to activate the remote control batter y. To replace the remote control battery: 1 Open the batter y compar tment. 2 Inser t 1 CR2025 batter y with correct polarity (+/-) as indicated. 3 Close the batter y compar tment. ( 4 ) Connect power Warning • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the apparatus. • Risk of electric shock! When you disconnect the AC power, always pull the plug from the socket. Never pull the cord. Note • Install the apparatus near the power supply socket and where the power plug can be easily reached. 1 Connect the AC power cord to the AC input jack on the apparatus and to the power supply socket. • To switch the apparatus off completely, disconnect the AC power cord from the power supply socket. ( 5 ) Note • To save energy: after use, turn off the apparatus. Turn on 1 Press . » The unit switches to the last selected source. 10 EN English 2 Connect the supplied MP3 LINK cable to 4 Play • the MP3 LINK socket on this unit. • the headphone socket on an MP3 player. Play CD 3 Star t to play the MP3 player. (See the user 1 Press SOURCE repeatedly to select the manual of the MP3 player.) CD source. 2 Open the disc compar tment. 3 Inser t a disc with the printed side facing up, and then close the disc compar tment. • To pause/resume play, press . • To stop play, press . • For MP3/WMA files: to select an album, press . • To skip to a track, press / . • To search within a track, press and hold / . Release to resume normal play. Play from USB devices Note • Ensure that the USB device contains playable audio contents for suppor ted formats. • The USB terminal can be loaded with 700 mA. 1 Press SOURCE repeatedly to select the USB source. 2 Inser t the USB connector on the device into the socket. 3 Press / unit to select a folder. 4 Press / to select a fi le. 5 Press to pause/resume play. 6 Press to stop play. Listen to an external device You can also listen to an external audio device through this unit. For an audio device with a headphone socket: Press SOURCE repeatedly to select MP3 LINK source. EN 11 5 Adjust sound Adjust volume level During play, press - VOLUME + to decrease/ increase the volume level. Enhance bass During play, turn on or off the DBB. » If DBB is activated, DBB is displayed. Mute sound During play, press MUTE to mute or restore volume. 6 Play options Select play modes 1 Press MODE repeatedly to select a play mode: • [ ] (repeat) – repeat a track • [ ALB] (repeat album) – repeat an album • [ ALL] (repeat all) - repeat an entire CD/program • [ ] (shuffle) - play tracks randomly 2 To return to normal play, press MODE repeatedly until play mode icons are no longer displayed. Tip • S hu f f le play c annot be selec ted w h e n you play programmed tracks. Program tracks You can program a maximum of 20 tracks. 1 In CD/USB mode, at the stop position, press PROG to activate the program mode. » [PROG] (program) star ts to blinks. 2 For MP3/WMA tracks, press ALBUM/ PRESET +/- to select an album. 3 Press / to select a track number, and then press PROG to confi rm. 4 Repeat steps 2 to 3 to program more tracks. 5 Press to play the programmed tracks. » During play, [PROG] (program) is displayed. • To erase the program, in the stop position, press . Display play information During play, press DISPLAY repeatedly to select different play information. 12 EN English 7 Listen to the radio Tune to a radio station Note • For optimal reception, fully extend and adjust the position of the FM antenna. 1 Press SOURCE repeatedly to select FM or MW. 2 Press and hold / for more than 2 seconds. » The radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. • To tune to...