Votes - 5, Average rating: 3.8 ( )

Manafacture: Kenwood File size: 1.04 mb File name: Language of manual:

See “Playback in a random order (RANDOM mode)” . O Programmed play order See “Programming tracks in desired order (PGM mode)” . O Timed Play, where you use an optional audio timer to automatically begin playing all CDs or only specified CDs See “Timer operation” ¤ Chapter 3 Your CD changer includes a standard remote and a remote keyboard (for easier text entry). You can use either device to control the changer. For the sake of simplicity, this manual provides standard remote instructions for all functions except text entry. Preparation Up to 200 CDs can be loaded in the carousel. Disc exchange also is possible during playback. Never let your hand or any object enter inside the unit. Loading discs in the carousel 1 1 Switch power ON. Chapter 3 IDCS001 Press the POWER ( ) button. 2Open the disc door toward the front. Press PUSH OPEN at the right top of the disc door. 3Load discs. O Do not place any object on the open disc door. 1Turn the DISC SKIP knob and bring the slot with the disc to be placed to the front. Carousel 2Insert the disc vertically. Disc slot Insert one CD per slot all the way. The slot No. is displayed when the DISC SKIP knob is turned. Insert discs with the label on the right side. Playback is not possible when a disc is inserted the other way round. ODo not insert more than one disc in a slot. 3Repeat 1 and 2 to insert discs. Main unit NoteNote OWhen a disc not corresponding to CD-TEXT is inserted, searching for this disc will be facilitated when the title is registered at the time of disc insertion. “Registration of Title ” . STANDBY POWER ON/STANDBY Continued to next page Insert CDs with the label side facing toward your right. Preparation Chapter 3 LALADATRAED Disc replacement Discs can be replaced with the same procedure as “Loading discs in the carousel”. In stopped condition, all discs can be exchanged. However, when the disc door is opened while “DISC DETEC- TION” is being displayed, it may not be possible to remove the disc which had been played. Accordingly, wait for the “DISC DETECTION” indication to go out before opening the disc door. When the disc information has been read in at the time of regis- tration of disc information like title, music type, etc., the disc information can be recalled even when the disc insertion place is changed. » OWhen a title has been registered and the disc door is closed, reading operation is performed automatically. The display flashes. In regard to ALL DATA READ mode The disc information for all discs will be read. We recommend to execute this mode before playback after discs have been exchanged. Close the disc door before operation. 1 Press the MODE button. 2 Select “ALL DATA READ”. 3 Set the input. Each press switches the modes as follows: Search in progress or reading information The display flashes. When the disc is CD-TEXT O Repeat the above procedure so that the complete disc information is read into the CD player. O In the case of a non-CD-TEXT disc, the “D001:NO CD TEXT” display will appear for approx. 3 seconds. 4Close the disc door. To quit ALL DATA READ mode Press the 7 button. 1MUSIC TYPE 2USER FILE 3DISC SEARCH 4TITLE INPUT 5ALL DATA READ 6ALL INFORMATION IDCSDTECEITONDSICERDANIG0D10:DCTXET MODE DISC SKIP DOWN UP SET To display the title on a LCD remote control unit (provided with a KENWOOD Receiver or optional), perform the all data read opera- tion first, and operate the LCD remote control unit with the door left closed. For the operation of the LCD remote control unit, refer to the instruction manual provided with your receiver or LCD remote control unit. NotesNotes 1. Please remove all CDs from the carousel before moving the unit. 2. If blinking “PLEASE WAIT” is displayed when the disc door is opened, do not attempt to change the disc. Normal play (TRACK mode) Playing tracks in order from track No.1 Use the following procedure to play a CD in the original order of tracks from track No.1. 1 1 Select the disc. Chapter 31D32 Previous disc Go to step 2 within 8 sec. 2Start playback. To pause playback OEach press pauses and plays the CD alternately. To stop playback OEach press of a button increases (or decreases)the disc number. Hold- ing the button depressed varies the disc numbers successively. OWhen the disc corresponds to CD-TEXT, or when the disc title has been registered, the disc title will be displayed with scrolling. Discs can be selected by the disc title. “Registration of Title” . Display when disc No. 123 is selected Next disc ENTER 6 ENTER 6 7 DISC SKIP DOWN UP OWhen the disc corresponds to CD-TEXT, or when the track titles have been registered, the track title is displayed. Normal play (TRACK mode) Chapter 3 Direct disc selection 1 Press the DISC SELECTOR button. 2 Input the disc number. 3 Start playback. Within 8 seconds! 32 4 H I J K L M N O P Q R S 1 76 85 +100 +100 9 X SELECTOR DISC ENTER 6 Within 8 seconds! Press the numeric buttons in the following order... Disc No. 63 : 6, 3 Disc No. 100 : 1, 0, 0 How to input num...

Download now

Please, enter two numbers from picture: