Votes - 6, Average rating: 3.8 ( )

Manafacture: Yamaha File size: 2.68 mb File name: Language of manual:

Photos and specs  Yamaha  CDX-596

If so, in step 5 and 6, press SYNCHRO and then press on this unit’s remote control. Recording automatically begins. (For details, refer to page 21.) E-17 m Manual tape-programming This is for recording desired tracks in any order onto a tape. OPEN/ SYNCHRO DIMMER CLOSE SPACE PEAK 7 4 4 TAPE CLEAR PROG 321 654 987 INDEX+I00 2 6, 7 3, 5 RANDOMREPEAT 1 Follow steps 1 – 3 on page 16. 2 Press PROG. PROG PROGRAM 1 11 2 12 3456789 10 A TOTAL REMAIN PROGRAM A CDX-596 CDX-496, CDX-396 Blinks. Blinks. Blinks. 3 Use numeric buttons to select desired tracks (to be recorded on side A) in any order. * Programmed track numbers light up on the display. You can select a track which can be programmed for the remaining time on side A from track numbers flashing on the display. You cannot, however, select a track number extinguished from the display. 321 654 987 +I00 4 When track selection for side A is finished, press TAPE. A pause is inserted. TAPE 5 Use numeric buttons to select the track numbers (to be recorded on side B) in any order. 321 654 987 +I00 6 Begin recording on the tape deck, and then press on this unit. 7 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording, and then press or on this unit. Notes . If, in step 3 or 5, “ERROR” or “E rr” appears on the display, the track number just selected cannot be programmed because there is not enough time remaining on the tape. However, at this time, if any other track number is flashing continuously on the display, you can program it instead of the unprogrammable one. . In step 3 or 5, each time a selection is made, the track number and the tape’s remaining time will be displayed, and then the display will change to indicate the next program number. c To check, cancel or correct program data, refer to page 15. * When checking program data, note that “PAUSE” or “Pu” appears between track numbers for side A and side B. . Up to 40 tracks can be programmed. If, however, a pause is inserted, it is counted as one track. . CD synchronized recording function can be used if your tape deck is compatible with it. If so, in step 6 and 7, press SYNCHRO and then press on this unit’s remote control. Recording automatically begins. (For details, refer to page 21.) EnglishEnglish m Random sequential tape-programming The unit will automatically program tracks in random sequential order for recording to tape. RANDOMREPEAT 4 2 3, 4 1 Follow steps 1 – 3 on page 16. 2 Press RANDOM. * The unit will automatically program tracks at random for both side A and side B considering the tape’s total time. RANDOM 3 Begin recording on the tape deck, and then press on this unit. 4 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording, and then press or on this unit. Notes . Because programmed data changes every time RANDOM is pressed, the unrecorded space at the end of each side of the tape also varies accordingly. . All tracks may not be programmed if the tape’s length is not enough. To program all tracks, use a tape that is longer than the actual playing time. c In step 2, you can check the program data for side A and side B. CDX-596 1324PROGRAM 2 12 4 6 8 A CDX-496, CDX-396 13 TOTAL PROGRAM A 24 1 Shows the number of tracks programmed on each side right after the programming is finished. It is then replaced by the number of the first programmed track on side A. 2 Shows the programmed track numbers on each side. 3 Shows the total time of programmed tracks on each side. 4 Shows the side of the tape. . Up to 40 tracks can be programmed. A pause inserted between side A and B is counted as one track. . CD synchronized recording function can be used if your tape deck is compatible with it. If so, in step 3 and 4, press SYNCHRO and then press on this unit’s remote control. Recording automatically begins. (For details, refer to page 21.) E-19 Automatic searching for the peak level on a disc The unit automatically searches for a part in the disc where the source level peaks and next plays that part repeatedly. When recording to tape, this feature is very helpful for adjusting the recording level on the tape deck. 1 Press to stop the unit. 2 Press PEAK. “PEAK” lights up on the display, and the peak level search is performed on the disc. It takes a few minutes to search for the peak level. Next, the part where the source level peaks is repeatedly played. Adjust the recording level on the tape deck listening to this sound. CDX-596 CDX-496, CDX-396 PEAK REPEAT 11 12 89 10 REPEAT 11 12 89 10 PEAK REPEAT PEAK REPEAT To cancel the peak level search function Press . (Some other buttons can also be used.) Notes . Even if the peak level search is performed several times on the same disc, the same part will not be always selected. That is because the unit searches for the peak level among parts of the disc that are randomly selected by the internal microcomputer. . In the program play mode, this feature will function among the pr...

Download now

Please, enter two numbers from picture: