Votes - 4, Average rating: 4.3 ( )

Manafacture: Yamaha File size: 8.55 mb File name: Language of manual:

Photos and specs  Yamaha  CDX-497

Other manuals for this model:

CD Players - CDX-497 (8.55 mb)

Connections should be made to the correct input other. LINE OUT OPTICAL COAXIAL DIGITAL OUT L R CD DIGITAL IN OPTICALCOAXIALterminals of the amplifier or another component. Amplifier To AC outlet 1Audio pin cable (included) Europe and U.K models 2Optical cable (not included) 3Coaxial cable (not included) The shaded part ( ) is provided for CDX-497 only. ¦ To connect this unit to your amplifier, choose one of the ways listed below. Caution Do not plug in this unit to a wall outlet until all connections are complete. When the LINE OUT (analog) terminals of this unit are used ( 1 ) Connect these terminals to the “CD” (or “AUX”) terminals of the amplifier. For details concerning these connections, refer to the operation instructions of the amplifier being used. * Be sure that the left (“L”) and right (“R”) of these terminals are connected to the corresponding (left and right) terminals of the amplifier or another component. (CDX-497 only) . The level of signals output from any of these terminals into an amplifier can be adjusted by the OUTPUT LEVEL +/– buttons. . When using the DIGITAL OUT (OPTICAL or COAXIAL) terminal, set the level of signals output into an amplifier to max. by using the OUTPUT LEVEL +/– buttons. When the DIGITAL OUT (OPTICAL) terminal of this unit is used ( 2 ) . Make the connection from this terminal to the optical input terminal of an amplifier by using a commercially available optical cable. * Use a reliable optical cable. . This terminal can also be connected to the optical input terminal of an MD recorder etc. to record CD onto MD directly. When the DIGITAL OUT (COAXIAL) terminal of this unit is used ( 3 ) (CDX-497 only) Make the connection from this terminal to the digital input terminal of an amplifier by using a coaxial cable. ¦ To connect this unit to the AC outlet After you made all connections, connect the power cable of this unit to the AC outlet. 4 En IDENTIFICATION OF COMPONENTS ( ) indicates the page number on which the controls are best described. Front panel English The control functions on the main unit and on the remote control are virtually identical, with the exceptions below. POWER (p. 7)Disc tray (p. 7) / (play/pause) (p. 7) Display panel Remote control sensor (p. 3) PHONES jack (p. 11) )))))(open/close) (p. 7) (stop) (p. 8) / (p. 9) / (p. 9) . / on the main unit has both the functions of (play) and (pause) on the remote control. . / and / on the main unit has both the functions of / (skip) and / (search) on the remote control. The shaded part ( ) is provided for CDX-497 only. Display Audio CD CD PROG. RANDOM ALL A B 1 23 5 1 Lights up the icon for the selected playback mode. 2 Shows the time displays. (For details, refer to on page 10.) 3 Shows the track number selected or being played back. 4 Shows the file number. 5 Lights up when a music disc is in the disc tray. 6 Lights up when the MP3 disc is played back. 7 Lights up when the WMA disc is played back. MP3, WMA (CDX-497 only) WMA PROG. RANDOM ALL A B MP3 7 1 42 5 En Remote control ) Remote control OPEN/CLOSE (p. 7) Numeric buttons (p. 8) DIMMER (p. 11) REPEAT (p. 12) A-B (p. 13) SYNCHRO (p. 21) TAPE (p. 16) SEARCH / (p. 9) (play) (p. 7) (stop) (p. 8) TIME/INFO(p. 10) Cursor buttons (p. 8) TIME/INFOFOLDERFOLDERENTERFILEOUTPUTLEVELFILESYNCHROTAPEPEAKSPACEREPEATDIMMERRANDOMINDEX0965872143OPEN/CLOSEA–BPROGRAMCLEAR INDEX (p. 15) RANDOM (p. 12) CLEAR (p. 15) PROGRAM (p. 14) SPACE (p. 11) PEAK (p. 20) / (skip) (p. 9) (pause) (p. 8) OUTPUT LEVEL +/– (p. 11) Note The initial setting of the output level is set to maximum. The shaded parts ( ) are provided for CDX-497 only. 6 En This manual describes how to operate this unit by using the remote control. To operate this unit from the front panel, use the corresponding buttons on the front panel. BASIC OPERATION English 2, 3 1 4 SEARCH 2 43 OPEN/CLOSE 1 Press POWER to turn on the power. 2 Press ) OPEN/CLOSE to open the disc tray, and load a disc. Label side up. OPEN/CLOSE 3 Press ) OPEN/CLOSE to close the disc tray. OPEN/CLOSE 4 Press to start playback. Playback starts from the first track of the disc. Notes . After closing the disc tray by pressing , the . Additionally, you can close the disc tray by pressing , a display sho numeric button or RANDOM, or by pressing the front edge of the disc tray gently. If the tray is closed in one of these ways, playback starts automatically; however, the display will not Audio CD show the total number of tracks nor the total recorded time of the disc. Caution When the disc tray is open, do not touch the inside gear wheel. If you touch the gear wheel, your finger may be caught in the closing tray and injured. Gear wheel CD Total number of tracks Total recorded time of a disc Total number of files MP3, WMA (CDX-497 only) 7 En To pause playback To turn off the power Press . To resume the playback, press again (or press ). * on the front panel can also be used to stop the playback temporarily or to resume the playback. To stop playback Press ....

Download now

Please, enter two numbers from picture: