DURCI I FIJI IRl .’NC. ANDERER VORGÄNGE ALS DER HIER ANGEGEBENEN KANN ZU GEFÄHRLICHER SIR AI II.UNG FÜHREN. REPARATUREN DÜRFEN NUR VON QUALIFIZIERTEM FACHPERSONAL Dl JRCI «GEFÜHRT WURDEN. AVERTISSEMENT! CEF APPARFII. IJTD ÎSE UN LASER. L’UTILISATION DE COMMANDES OU DE RÉGLAGES OU L'EXÉCUTION DE PROCÉDURES AUTRES QUE CELLES SPÉCIFIÉES ICI PEUVENT PROVOQUER UNE EXPOSITION À DES RADIATIONS DANGEREUSES. NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE RÉPARER SOI-MÊME. CONFIER TOUT TRAVAIL D'ENTRETIEN

DURCHFÜHRUNG ANDERER V ORGÄNGE ALS DER HIER ANGEGEBENEN KANN ZU GEFÄIIRLICI 1ER STR AI ILUNG FÜI IREN. REPARATUREN DÜRFEN NUR VON Q U A LIF1 ZI ER I E M FA C H P E R SO N A L DURCHGEFÜHRT WERDEN. AVERTISSEMENT! CET APPAREIL UTILISE UN LASER. L’UTILISATION DE COMMANDES OU DE RÉGLAGES OU L'EXÉCUTION DE PROCÉDURES AUTRES QUE CELLES SPÉCIFIÉES ICI PEUVENT PROVOQUER UNE EXPOSITION À DES RADIATIONS DANGEREUSES. NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE RÉPARER SOI-MÊME. CONFIER TOUT TRAVAIL D'ENT

Store this manual in a safe place after reading it. XÑOTE)-—-s * In this manual, the following disks are described as disks. Superdisk (120 MB) Floppy disk (720 KB, 1.44 MB) V_/ Some of the illustrations included with the text may differ slightly in shape from the actual items included in the kit in order to make the explanation easier to understand. Microsoft®, MS-DOS® and Windows® are registered trademarks of Microsoft Corporation in the United States and/or other countries. Imation, t

MS-DOS® and Windows® arc registered trademarks of Microsoft Corporation in the United States and/or other countries. Usage Precautions • Do noi place items other than discs on the tray. • Do not leave the tray in the open position or touch the lens area. Should the lens become soiled by dust or dirt, the unit may not read discs properly. • Under some conditions, dust may build up on the optical lens or disc, possibly resulting in malfunction. • Do not apply excessive force to the tray in th

^ Deactivate unnecessary equipment using in Setup Utility. 2m Removing the device (Floppy disk drive) ® Press the MP release button. The device will eject slightly. (2) Remove the device by holding both sides of the device. • Please handle the device as shown (holding both sides). Otherwise, the device may be damaged. Also, do not apply excessive downward force on the device. The projections at the bottom of a device become deformed. • Be sure the shape of the lock at the bottom of a devic

When the error message is displayed, press the enter key. In the Setup Utility, select "Load Default Settings (PnP)". This will restore the Setup Utility's settings to their default values, then the Setup Utility must be run once again to make the appropriate operating environment settings. 5 Software Preparation (first time only) 1 Power on. 2 Select [Start]-[ProgramsJ-(MS-DOS Prompt], then type the following command: DELTREE C:\UTlL\DRIVERS\LS

If this happens, restart your computer. Note: • If you turn off the drive while your computer and the drive are connected, your computer will not be recognized the drive. To use the drive again turn on the drive or disconnect the USB cable and connect it again. 22 Inserting / Removing a Disc Inserting a disc (T) Slide the OPEN lever to open the disc cover and then raise it. (2) Place a disc onto the disc spindle. Press on the center of a disc until it locks onto the disc spindle. (3) Clo

(Deleting “rem” causes the item to become valid.) DEVICEHIGH=C:\WINDOWS\COMMAND\OAKCDROM.SYS /D:MSCD000 (If this line is missing, add it.) 5 Press( Alt) +CD 1 thenfSP to save the file. Then press C Alt) +C~F"). then to exit the Edit program. 6 Follow the same steps to edit the “AUTOEXEC.BAT” file, edit autoexec.bat ( Enter ) 7 Move the cursor to the line containing “MSCDEX.EXE” and delete the characters “rem” at the beginning of the line. (Deleting “rem’’ causes the item to become valid.) LO

1998 3 M Features: • Fast Performance - Ultra Compact Design —20X (Max.)*1 performance portable CD-ROM player —Weight less than 12 ounces (approx. 330 %) —Slim design and lightweight - a truly portable drive • Easy Connection to a Notebook Computer with a PC Card Slot (PCMCIA Type JI) —Includes Plug & Play PC card interface*2 • Power right from your PC Card Slot *3 so it’s truly plug & play —Plug the AT API PC card into your Notebook computer and its ready to —No need to carry power cab

• Is the drive properly mounted in the multi-media pocket? The MP indicator (pF^) does not light. Is the disc loaded on the tray correctly? Cannot play disc or read data from it. Is the disc bent, scratched, or dirty? Cannot eject disc. Is the computer powered on? To remove a disc when the computer is powered off, insert a sharp object such as the bent-out tip of a paper clip into the emergency hole. Pushing it completely to the end will free the tray so that it can be pulled out. Emergency H