Votes - 3, Average rating: 4 ( )

Manafacture: LG File size: 193.26 kb File name: Language of manual:

4 PC Connection The Super Multi DVD Rewriter connects to the motherboard of the host computer using a SATA interface cable. Data cable Power cable Data cablePower cable Connecting the SATA Power Cable Connect the power cable so the projection of the cable connector side to come to the left side. Be careful not to connect upside down. NOTE : Improper connection may damage the drive and void the warranty. Generally, the power connector can only fit one way. Red Connect to the power connector of the PC. Connecting the SATA Data Cable Connect the data cable. Be careful not to connect upside down. 5 Connect to the SATA connector on the PC's Motherboard. Device Drivers When using Windows XP Home Edition/XP Professional/Vista/Windows 7, no special device driver is required. Your system, upon Power On and bootup after installing and connecting the new Super Multi DVD Rewriter, will recognize and load native software drivers automatically. Please consult the following internet sites: (then choose your country from the list) For Windows XP/Vista Users ¦ In order to ensure normal drive operation, please check the following: • The drive is displayed in Windows XP : [Control Panel]-[System]-[Hardware]-[Device Manager][ DVD/CD-ROM-drives] Windows Vista : [Control Panel]-[Device Manager]-[DVD/CD-ROM-drives] • 32-bit is displayed in [Control Panel]-[System]-[Performance] ¦ If the drive is not recognized by your computer, please check the following items. • If an indicator is displayed on the IDE controller in [Control Panel][ System]-[Device Manager]-[Hard Disk Controller], you will need to contact your PC’s manufacturer or the motherboard’s manufacturer and get the appropriate IDE controller driver. ¦ Run Add New Hardware in Control Panel to let PC search again for new device. Software Install the appropriate CD Recording Authoring Software before using this unit. * Please uninstall any previous CD burning software you may have loaded on your PC in order to prevent possible compatibility issues. Once you have installed the application software, you may (if you wish) begin to reinstall previous software, taking note for errors. We recommend using the drive with the latest software as some problems encountered when using the drive can be solved by updating the software. WARNING: Only drives bearing the logo Compact Disc ReWritable Ultra Speed can write or erase Ultra Speed CD-RW media. Ultra Speed CD-RW Media may be recognized by the same Compact Disc ReWritable Ultra Speed logo on the disc label or packaging material. Attempting to write to Ultra Speed CD-RW media using CD-RW drives NOT bearing the logo Compact Disc ReWritable Ultra Speed may result in data loss. 6 How to Use the Discs When using CD-ROM discs, CD-R discs, DVD discs or CD-RW discs, don’t attach any stickers or labels to the discs. It could cause read and write errors, but data on the disc may be lost due to damage to the disc itself. The Discs in this unit operate at a very high speed! DO NOT use damaged, cracked or warped discs. The drive’s optical unit may be damaged if they break. DO NOT use non-standard discs. NON-standard discs may not play or store data properly. Emergency Eject This drive has a feature that allows the CD to be ejected manually if this becomes necessary such as failure of the drive or a power outage. NOTE: Don’t use this feature except in an emergency. 1) Turn the power to OFF. 2) Poke a fine-tipped object (such as a straightened heavy duty paper clip) into the small hole above the eject button. The front door will pop open and the disk tray will come partway out. 3) Pull the front door to open it all the way, then grip the disc tray between thumb and forefinger and gently pull it straight out. NOTE: This feature is a last measure to be used only in an emergency. Using it excessively will cause malfunction. * If you cannot get a good grip on the disc tray with your fingers, use a steel binder clip or spring clamp to pull it out. 7 Troubleshooting Before Requesting Service Before calling for service, check this list. • The drive doesn’t have power. • Is the power supply cable from the host computer plugged in? • Is the Power Connector to the drive securely attached? • The system doesn’t start. • Are the power and SATA cables to the PC correctly connected? • Is the total length of the SATA cable 20 inches or less? • Is each connector completely attached? Other connections may have been knocked lose while installing the drive. • Cannot Read or Write Discs. • Is the condition of everything else in the system (CPU, hard disc, and others) as it should be? • Does the CD or DVD disc have dirt or scratches? • Did a screen saver or other application operate while writing to the disc? • Is there enough free space on the CD, DVD and DVD-RAM disc? • Does writing fail even using the simulation test? • Is the disc loaded in the drive with the read/write surface facing the right direction? (label up) • Is the drive installed ...

Download now

Please, enter two numbers from picture: