Votes - 2, Average rating: 3.5 ( )

Manafacture: LG File size: 127.42 kb File name: Language of manual:

• Make sure you have a personal computer with an open USB port before connecting the drive to your computer. • Power for all other devices should be turn off before attaching the cables. Connect the drive to the computer as shown in figure. A. Using an USB 2.0 cable only. 1. Connect the USB 2.0 cable to the External Super Multi DVD Rewriter. 2. Connect the other end of the USB 2.0 cable to your computer. B. Using USB 2.0 Cable and USB Power cable. (DC-jack type) 1. Connect the USB 2.0 cable to the External Super Multi DVD Rewriter. 2. Connect the other end of the USB 2.0 cable to your computer. 3. Connect the USB power cable (DC-jack type) to the External Super Multi DVD Rewriter. 4. Connect the other end of the USB power cable to your computer. • The Rewriter may get its power from the USB power. All systems may not meet USB power requirements and full performance may not be achieved. In this case, connect to the included USB power cable (DC-jack type.). • Please do connect the USB cables by any means other than specified above. Using the wrong type of cable with this drive can cause it to malfunction. When the computer is ready, confirm that the drive is detected. And then, insert the supplied software CD into the External Super Multi DVD Rewriter and install the software. • The machine does not have an ON/OFF switch. As soon as it is connected to the AC power, the power up sequence begins. The power supply cord is intended to serve as the main disconnect device. The power outlet shall be near the equipment and shall be easily accessible. • The appliance is not intended for use by young children or infirm persons without supervision. • Young Children should be supervised to ensure that they do not play with appliance. • If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture. Installation USB Power cable (DC-jack type) NOTES Connecting to computer Hardware Installation NOTES NOTES A. Using an USB 2.0 cable only. B. Using USB 2.0 Cable and USB Power cable. (DC-jack type) USB 2.0 cable USB 2.0 cable • Please pay attention to handling Electrostatic Sensitive Devices, you may use anti-static products such as wrist straps, heel straps, mats to protect your body from electrostatic. • Make sure you have a personal computer with an open USB port before connecting the drive to your computer. • Power for all other devices should be turn off before attaching the cables. Connect the drive to the computer as shown in figure. A. Using an USB 2.0 cable only. 1. Connect the USB 2.0 cable to the External Super Multi DVD Rewriter. 2. Connect the other end of the USB 2.0 cable to your computer. B. Using USB 2.0 Cable and USB Power cable. (DC-jack type) 1. Connect the USB 2.0 cable to the External Super Multi DVD Rewriter. 2. Connect the other end of the USB 2.0 cable to your computer. 3. Connect the USB power cable (DC-jack type) to the External Super Multi DVD Rewriter. 4. Connect the other end of the USB power cable to your computer. • The Rewriter may get its power from the USB power. All systems may not meet USB power requirements and full performance may not be achieved. In this case, connect to the included USB power cable (DC-jack type.). • Please do connect the USB cables by any means other than specified above. Using the wrong type of cable with this drive can cause it to malfunction. When the computer is ready, confirm that the drive is detected. And then, insert the supplied software CD into the External Super Multi DVD Rewriter and install the software. • The machine does not have an ON/OFF switch. As soon as it is connected to the AC power, the power up sequence begins. The power supply cord is intended to serve as the main disconnect device. The power outlet shall be near the equipment and shall be easily accessible. • The appliance is not intended for use by young children or infirm persons without supervision. • Young Children should be supervised to ensure that they do not play with appliance. • If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture. Installation USB Power cable (DC-jack type) NOTES Connecting to computer Hardware Installation NOTES NOTES A. Using an USB 2.0 cable only. B. Using USB 2.0 Cable and USB Power cable. (DC-jack type) USB 2.0 cable USB 2.0 cable 1. Disc Tray 2. Drive activity indicators The LED used to indicate the operation of External Super Multi DVD Rewriter. 3. Eject Button 4. Emergency Eject Hole 1. Power Connector This connector is used to connect to the USB power cable. (DC-jack type) Or, this connector is used to connect to the AC Power adapter cord (5V, 2A, outside diameter: 4mm, inside diameter: 1.75mm) (Not suppli...

Download now

Please, enter two numbers from picture: