. ( “Multimedia Pocket”) Right-click [(x:)]*1 in [start] - [My Computer], select [Properties] - [Recording], then delete the check mark for [Enable CD recording on this drive]. (Delete the check mark for [Enable CD recording on this drive] every time a new user is added.) “x” is the drive letter. You can change the letter to suit your preference. Select [Start] - [Settings] - [Control Panel] - [Add/Remove Programs] to check which version of Windows Media Player is provided on your computer, and then follow the steps below to uninstall Adaptec CD-Burning Plug-in. 1 Select [Windows Media Player 7] - [Change/Remove] in [Add/Remove Programs]. 2 Select [Remove Windows Media components] and select [Next]. 3 Select [Adaptec CD-Burning Plug-in] from the components list, and select [Next]. 4 If the message “Windows Media setup is now ready to uninstall” appears, select [Next]. 5 Select [Finish] and restart the computer. 1 Select [Start] - [Run], input [rundll32 advpack.dll,LaunchINFSection C:\winnt*2\inf\roxio.inf,uninstall], and se lect [OK]. 2 At [Advanced INF Install] screen, select [OK]. *2 C:\winnt denotes the folder where Windows is installed. A different letter may be input for the drive instead of C depending on which letters are assigned to which drives for use. E Do not install the software using a drive other than this drive. Be sure to insert this drive into your computer, and then insert the disc for installation. Close all other software application before running the Setup program for DVDRAM Driver, WinDVD, B’s Recorder and B’s CLiP for added safety. Log on to Windows with the administrator authority. Do not lose the serial number marked on the sticker on the packaging of the CD case. CAUTION NOTE Depending on the computer, preparatory steps may be necessary before installation. Before installing the application, be sure to read the Operating Instructions or Reference Manual of the computer. Using the Software DVD-RAM Driver After installing DVD-RAM Driver, you can use a DVD-RAM disc. For more information, refer to the online manual of DVD-RAM Driver ( page 13). Installing DVD-RAM Driver 1 Set “DVD Drive Utility Disc” in the drive. E Windows XP [Utility Setup tool] screen will appear (allow some time for disc recognition). When the setup program will not run automatically, input [x:\setuputil.exe]*1 in [start] [Run] and select [OK]. Windows 2000 At the message, select [OK]. [Utility Setup tool] screen will appear (allow some time for disc recognition). When the setup program will not run automatically, input [x:\setuputil.exe]*1 in [Start] [ Run] and select [OK]. At the message, select [OK]. *1 “x” is the drive letter. You can change the letter to suit your preference. 2 Select [DVD-RAM Software Setup]. 3 Select [Driver and Formatter Setup]. 4 At the welcome screen, select [Next]. 5 The License Agreement screen appears. Carefully read the agreement, then select [Yes]. 6 At [Choose Destination Location] screen, do not change the setting, and select [Next]. 7 At [Select Program Folder] screen, do not change the setting, and select [Next]. 8 At [Start Copying Files] screen, select [Next]. 9 After installation, execute the following operations. Windows XP restart automatically. Windows 2000 Select [Yes, I want to restart my computer now], then select [Finish]. The computer will Select [Finish]. (Then detecting DVD-RAM devices will start. If [Found New Hardware Wizard] screen is displayed, select [Finish].) When [System Settings Changes] screen is displayed, select [Yes]. (If two [System Settings Changes] screens are displayed, select [Yes] on one of them.) The computer will restart automatically. NOTE DVDForm can be used only when logging on with administrator authority. ( page 22) Windows 2000 After installing DVD-RAM Driver, a new removable disk drive will be allocated. This newly added drive will be used when writing to the DVD-RAM disc. NOTE DVDForm can be used only when logging on with administrator authority. ( page 22) Windows 2000 After installing DVD-RAM Driver, a new removable disk drive will be allocated. This newly added drive will be used when writing to the DVD-RAM disc. Windows XP How to access the Online Manual Select [start] - [All Programs] - [DVD-RAM] - [DVD-RAM Driver] - [Using DVD-RAM E disc]. Windows 2000 Select [Start] - [Programs] - [DVD-RAM] - [DVD-RAM Driver] - [Using DVD-RAM disc]. Using the Software WinDVD WinDVD is a software application for DVD playback. Here, you will find explanations and general information on the installation procedure and how to access the online manual. Installing WinDVD E 1 Set “DVD Drive Utility Disc” in the drive. ( page 12 step 1) 2 Select [WinDVD Setup]. 3 Select [Next] at the Welcome Message. 4 After reading the “License Agreement”*1, select [Yes] if you agree to the terms. *1 Refer to the “LIMITED USE LICENSE AGREEMENT” on the Operating Instructions of the compu...
)
