Votes - 0, Average rating: 0
(
)
)
|
manual abstract
OUT terminal. 192 kHz or 96 kHz digital • Copyright-protected audio is converted to 48 kHz or less before audio signals cannot be output. output from the DIGITAL • Set Max Sampling Frequency to 96KHz or 192KHz (page 37). OUT terminal. Secondary audio or Is HDMI Audio Out properly When listening to the sound from an HDMI OUT terminal, set HDMI interactive audio is not set? Audio Out to PCM (page 38). output. Are Digital Output properly When listening to the sound from an DIGITAL OUT terminal, set set? Digital Output to Re-encode or PCM (page 37). After a disc is inserted, Are there too many files When a disc on which files are recorded is inserted, depending on the Loading stays displayed and recorded on the disc? number of files recorded on the disc, loading may take several dozen playback does not start. minutes. . is displayed in file names, The characters that cannot be displayed on this player are displayed in etc. .. A message indicating low • Connect a USB device (page 18). memory appears while • Erase the data stored on the connected USB device from BUDA playing a BD-ROM disc. Setup (page 41). En Control function Problem Check Remedy Control function does not work. Is the HDMI cable properly connected? Is the HDMI cable you are using a High Speed HDMI®/ TM Cable? Is this player connected to the TV using an HDMI cable to watch the picture? To use the Control function, connect the TV and AV system (AV receiver or amplifier, etc.) to the HDMI OUT terminal (page 15). Use a High Speed HDMI®/TM Cable. The Control function may not work properly if an HDMI cable other than a High Speed HDMI®/TM Cable is used. If video signals are being output from a terminal other than the HDMI OUT terminal, the Control function does not work. Connect to the TV using an HDMI cable (page 15). Is Control set to On on the Set Control to On on the player (page 38). player? Does the connected device support the Control function? • The Control function will not work with devices of other brands that do not support the Control function, even when connected using an HDMI cable. • The Control function will not work if devices that do not support the Control function are connected between the Control-compatible device and the player. See page 16. • Even when connected to a Pioneer product compatible with the Control function, some of the functions may not work. Also refer to the operating instructions for the connected device. Is Control set to On on the connected device? Set Control to On on the connected device. The Control function operates when Control is set to On for all devices connected to the HDMI OUT terminal. Once connections and settings of all the devices are finished, be sure to check that the player’s picture is output to the TV. (Also, check after changing the connected devices and connecting and/or disco...
Other models in this manual:Blu-Ray Players - BDP-170-S (4.93 mb)
Blu-Ray Players - BDP-170-W (4.93 mb)