Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
Blu-Ray Players - BDP-S7200 (961.74 kb)
Blu-Ray Players - BDP-S7200 (547.11 kb)
manual abstract
Should any problem persist, consult your nearest Sony dealer. Picture There is no picture or the picture is not output correctly. , Check that all the connecting cables are securely connected (page 14). , Switch the input selector on your TV to display the signal from the player. , Reset the [Output Video Resolution] to the lowest resolution by pressing x (stop), HOME, and then POP UP/ MENU button on the remote. , Try the following: 1Turn the player off and on again. 2Turn the connected equipment off and on again. 3Disconnect and then reconnect the HDMI cable. , The HDMI OUT jack is connected to a DVI device that does not support copyright protection technology. , Check the [Output Video Resolution] settings in the [Screen Settings] setup (page 28). , For BD-ROMs, check the [BD-ROM 24p Output] setting in the [Screen Settings] setup (page 28). , For DVD-ROMs, check the [DVD-ROM 24p Output] setting in the [Screen Settings] setup (page 28). The display language on the screen switches automatically when connected to the HDMI OUT jack. , When [Control for HDMI] in [HDMI Settings] is set to [On] (page 31), the display language on the screen automatically switches according to the language setting of the connected TV (if you change the setting on your TV, etc.). Sound There is no sound or the sound is not output correctly. , Check that all the connecting cables are securely connected (page 14). , Switch the input selector on your AV amplifier (receiver) so that the audio signals of the player are output from your AV amplifier (receiver). , If the audio signal does not come through the DIGITAL OUT (COAXIAL)/HDMI OUT jack, check the audio settings (page 29). , For HDMI connections, try the following: 1Turn the player off and on again. 2Turn the connected equipment off and on again. 3Disconnect and then reconnect the HDMI cable. , For HDMI connections, if the player is connected to a TV through an AV amplifier (receiver), try connecting the HDMI cable directly to the TV. Refer also to the instruction manual supplied with the AV amplifier (receiver). , The HDMI OUT jack is connected to a DVI device (DVI jacks do not accept audio signals). , The device connected to the HDMI OUT jack does not support the audio format of the player. Check the audio settings (page 29). The HD Audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio, and DTS-HD Master Audio) is not output by bitstream. , Set [BD Audio MIX Setting] in [Audio Settings] setup to [Off] (page 29). , Check that the connected AV amplifier (receiver) is compatible with each HD Audio format. The interactive audio is not output. , Set [BD Audio MIX Setting] in [Audio Settings] setup to [On] (page 29). Message Code 3 [Audio outputs temporarily muted. Do not adjust the playback volume. The conten...