|
Other manuals for this model:
manual abstract
2 y phono plug . 3) (1) • Remote commander (remote) (1) • R6 (size AA) batteries (2) To prepare the remote Insert two R6 (size AA) batteries by matching the 3 and # ends on the batteries to the markings inside the battery compartment. Charging the Rechargeable Battery Charge the rechargeable battery before using the player for the first time, or when the battery is depleted. Connect the AC adaptor. When charging begins, the CHARGE indicator lights up in orange. To a wall outlet AC adaptor Mains lead (supplied) (supplied) When charging ends, the CHARGE indicator lights off. Disconnect the AC adaptor. z Charging takes longer if the player is turned on. When you only want to charge the battery, turn off the player. b Charge the battery in an ambient temperature of between 5°C and 35°C. Charging time and playing time Charging time: approx. 6 hours Playing time: approx. 5 hours Times indicated are under the following conditions: • Charging time – moderate temperature (20°C) – power-off • Playing time – moderate temperature (20°C) – headphone use – backlight set to minimum Depending on the ambient temperature or rechargeable battery condition, charging time may be longer, or playing time may be reduced. GB ,continued 11 Preparations To check the battery level To check the battery level is displayed or the CHARGE indicator flashes. Full Empty Using the Car Battery Adaptor The car battery adaptor is for a 12V car battery, negative earth (do not use it with a 24V car battery, positive earth). Connect the car battery adaptor. To cigarette lighter socket Car battery adaptor (supplied) After using the player in a car Disconnect the car battery adaptor from the cigarette lighter socket. b • The driver should not connect or disconnect the car battery adaptor while driving. • Arrange the cord so as not to interfere with the driver. Also, do not place the LCD panel where the driver can watch. • Clean the cigarette lighter socket. If dirty, the cigarette lighter socket may cause contact failure or malfunction. • Use the car battery adaptor with the car engine running. If it is used with the car engine off, the car battery may become depleted. • Do not leave the player or accessories in the car. GB Connecting to the Network Connecting to the Network LAN cable (not supplied) Broadband ADSL modem/ Internet router Cable modem To set the network settings Select “Network Settings,” “Internet Settings,” then “Wired Setup” (page 22), and follow the on-screen instructions to complete the setup. Connecting to Other Equipment By connecting the player to your TV or other equipment, you can increase your viewing options. b • Refer to the instruction manual supplied with the equipment to be connected. • Before connecting, turn off the player and the equipment to be connected, then unplug them from their wall sockets. Enjoying images on a connected TV 1 Connect the player to your TV or monitor using the audio/video or HDMI cable. or Audio/video cable (supplied) HDMI cable (not supplied) To HDMI input jack of a TV or monitor To AUDIO/VIDEO input jacks of a TV or monitor 2 Turn on the player. For HDMI connections, check the “HDMI/LCD Video Format” settings in the “Screen Settings” setup (page 19). GB ,continued 13 Preparations z zThe player can connect to an AV amplifier in the same way as a TV. • Use an HDMI cable to enjoy high quality digital pictures and sound. b • Do not connect the player through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the television. • No sound is output from the player’s speaker when connecting with an HDMI cable. Enjoying images output from other equipment on the player’s LCD screen 1 Connect the player to your video player or camcorder using the audio/ video cable. Audio/video cable To AUDIO/VIDEO output jacks of a video player or camcorder (supplied) 2 Turn on the player. 3 Select (Input) on the home menu using ,, and press ENTER. To return to the home menu Press HOME. GB Playback Playback For playable discs, see “Playable discs” (page 26). 1 Open the LCD panel, and turn on the player. 2 Press OPEN to open the disc lid, and place the disc. Place with the playback side down and push gently until it clicks. Do not touch the lens surface. Playing side facing Lens down 3 Close the disc lid. Playback starts. If playback does not start automatically, select in the (Video), (Music), or (Photo) category, and press ENTER. Enjoying BONUSVIEW/BD-LIVE Some BD-ROMs with the “BD-LIVE” logo* have bonus content and other data that can be downloaded for enjoyment. * 1 Connect a USB memory to the USB jack on the player (page 9). As your local storage, use a 1 GB or larger USB memory. 2 Prepare for BD-LIVE (BD-LIVE only). • Connect the player to a network (page 13). • Set “BD Internet Connection” to “Allow” (page 21). 3 Insert a BD-ROM with BONUSVIEW/ BD-LIVE. The operation method differs depending on the disc. Refer to the instruction manual suppli...