Votes - 3, Average rating: 4.7
(
)
)
|
manual abstract
(• 24) A black band is displayed around the edge of the screen. The aspect ratio of the screen is abnormal. • Confirm the “TV Aspect” is set properly. (• 28) • Adjust the aspect setting on the television. (Adjustment using “Screen Aspect” (• 17) on the unit is also possible) Cannot switch audio. • When connecting an amplifier/receiver using a COAXIAL/ OPTICAL terminal or an HDMI terminal, you cannot switch the audio if “Digital Audio Output” is set to “Bitstream”. Set “Digital Audio Output” to “PCM” or connect using AUDIO OUT terminal. (• 9, 27) Cannot hear the desired audio type. • Check the connections and the “Digital Audio Output” settings. (• 27) • When the unit is connected to an amplifier/receiver with the AUDIO OUT terminal, set “Analog Audio Output”. (• 28) • To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” to “On” in the Setup menu. (• 28) Playback Disc cannot be played. • The disc is dirty. (• 4) The contents of the USB device cannot be read. • USB devices connected using USB extestion cable other than the included or a USB hub may not be recognized by this unit. • If inserted during playback the USB device may not be recognized by this unit. • If two USB devices other than Wireless LAN adaptor are connected simultaneously, they will not be recognized by this unit. Still pictures (JPEG) do not play back normally. • The images that were edited on the PC, such as Progressive JPEG, etc., may not play back. I can’t play back BD-Live. • The SD card is write-protected. (• 7) • Confirm that this unit is connected to the broadband Internet. (• 10) • Confirm the “BD-Live Internet Access” settings. (• 26) • Confirm an SD Card is inserted into the SD Card slot. (• 15) Network & VIERA CAST I can’t connect to the network. • Confirm the network connection and settings. (• 10, 29) • Check the operating instructions for each device and connect accordingly. VQT2H76 Reference Messages The following messages or service numbers appear on the television or unit’s display when something unusual is detected during startup and use. On the television Cannot play. • You inserted an incompatible disc (Discs recorded in PAL video, etc.). Cannot display on this unit. • You tried to play a non-compatible image. • Confirm “SD” on the unit’s display is not blinking and re-insert the card. No disc is inserted. • The disc may be upside down. $ This operation is not available. • Some operations are unsupported by the unit. For example; – BD-Video: During playback, reverse slow-motion or reverse frame-by-frame is not possible. IP address is not set. • The “IP Address” in “IP Address/DNS Settings” is “---. ---. ---. ---”. Set the “IP Address”, “Subnet Mask”, and “Default Gateway”. (Select the automatic address acquisition if necessary.) On the unit’s display F99 • The unit fails to operate properly. Press [POWER I /I] on the main unit to switch the unit to standby for 3 seconds...
Other models in this manual:Blu-Ray Players - DMPBD85 (2.2 mb)