Votes - 2, Average rating: 3.5 ( )

Manafacture: Panasonic File size: 1.58 mb File name: DMPBDT310-MUL.pdf Language of manual:

(• 27) A black band is displayed around the edge of the screen. The aspect ratio of the screen is abnormal. • Confirm the “TV Aspect” is set properly. (• 31) • Adjust the aspect setting on the television. Audio Cannot switch audio. • When connecting an amplifier/receiver using an OPTICAL terminal or an HDMI terminal, you cannot switch the audio if “Digital Audio Output” is set to “Bitstream”. Set “Digital Audio Output” to “PCM”. (• 30) Cannot hear the desired audio type. • Check the connections and the “Digital Audio Output” settings. (• 9, 30) • To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” to “On” in the Setup menu. (• 32) • [BDT310] : When connecting this unit to a TV via an HDMI AV OUT MAIN and to an amplifier/receiver via an HDMI AV OUT SUB, set “HDMI(SUB) Output Mode” to “V.OFF”. (• 9) There is no sound coming out from the TV. [BDT310] • Audio may not output from the TV when the amplifier/ receiver is connected to the HDMI AV OUT SUB, and “HDMI(SUB) Output Mode” (• 31) is set to “V.OFF”. In such a case, output audio from the amplifier/receiver. To output audio from the TV, set the “HDMI(SUB) Output Mode” to “Normal”. Reference VQT3B58 35 Playback Network Playback Network Disc cannot be played. • The disc is dirty. (• 4) Still pictures (JPEG) do not play back normally. • The images that were edited on the PC, such as Progressive JPEG, etc., may not play back. I can’t play back BD-Live. • The SD card is write-protected. (• 7) • Confirm that this unit is connected to the broadband Internet. (• 10) • Confirm the “BD-Live Internet Access” settings. (• 29) • Confirm an SD Card is inserted into the SD Card slot. (• 16) I can’t connect to the network. • Confirm the network connection and settings. (• 10, 13, 32) • Check the operating instructions for each device and connect accordingly. When using Wireless LAN connection, videofrom the DLNA Certified media server is not played back or video frames are droppedduring playback. • Higher transfer rate router such as 802.11n (2.4 GHz or 5 GHz) Wireless router may solve the problem. If you use 802.11n (2.4 GHz or 5 GHz) Wireless router, it is necessary to set the encryption type to “AES”. Simultaneous use with a microwave, cordless telephone etc. at 2.4 GHz may result in connection interruptions or other problems. • On the “Wireless Settings” screen (• 32), the continuous lighting of at least 4 “Reception” indicators is the target for a stable connection. If 3 or fewer indicators are lit or the connection is being interrupted, change the position or angle of your Wireless router and see if the connection state improves. If there is no improvement, connect to a wired network and perform the “Network Easy Setting” (• 13) again. 36 VQT3B58 Messages The following messages or service numbers appear on the television or unit’s display when something unusual is detected during startup and use. On the television ...

Download now

Please, enter two numbers from picture: