Votes - 5, Average rating: 3.2 ( )

Manafacture: Mellerware File size: 1.04 mb File name: dad62000im.pdf Language of manual:

2.Do not touch hot surfaces. Use handles or knobs. 3.To protect against electrical shock, do not immerse cord, plug or appliance itself in water or other liquids. 4.Ensure the appliance is situated out of reach of children. Never allow a child to use this appliance. 5.Unplug from mains supply outlet when not in use and before cleaning. 6.Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair or adjustment. 7. The use of accessory attachments not recommended by the appliance manufacturer may cause injuries. 8. Do not use outdoors. 9. Do not let cord hang over edge of table or counter or touch hot surfaces. 10.Do not place on or near a hot gas or electric burner, or in a heated oven. 11. Always ensure the appliance is switched off before plugging into mains supply outlet. To disconnect, turn any control to OFF position, then remove plug from wall outlet. MW_ 620007-62000_Apollo_IM .indd2 22 MW_ 620007-62000_Apollo_IM .indd 3/19/20103/19/2010 12:12:20 PM 12:12:20 PM Before first use All parts of the blender are to be thoroughly cleaned before being used for the first time. Assembling the Jar: 1.Put the rubber sealing ring (5) on the inner edge of the blade unit (6). 2.Put the blade unit with sealing ring into the cup base (7). 3.Inset the ring (4) on the bottom of jar first, then Insert the assembled cup base onto the bottom of the jar (3) and turn clockwise to secure tightly in place. 4.Mount the Measure Cup (1) onto the Lid (2). 5.Secure the Lid onto Jar and press into place. Inserting the Jar: 1.Make sure that the blender is switched off (Switch in the ‘0’ setting). 2.Place the jar assembly (9) on to the motor base (8) and press down until securely engaged. Instructions for Use 1.Place the foodstuff you wish to process into the jar. 2.Place the lid on the jar and close securely. Place the measuring cap into the hole in the lid and turn clockwise to lock. 3.Place your hand on the lid and apply firm pressure before switching the unit ON. The appliance is fitted with a safety switch and requires sufficient downward pressure to operate. 4.Switch on the motor base to desired setting: Speed setting Use 1 for light usage with liquids 2 for more solid consistency – for mixing liquids and solid foodstuffs 0 stop operation M for ice crushing & short, powerful impulse movements (The switch does not permanently engage in the ‘PULSE’ setting. You have to hold the switch in the ‘PULSE’ setting or turn it repeatedly into the ‘M’ setting) WARNING: NEVER LEAVE THE APPLIANCE ALONE WHILE IN OPERATION. After using the blender, always move the switch into the ‘0’ setting and pull out the mains plug. To remove the glass jar simply lift it off the motor base. You do not have to rotate the glass jar to remove it. Useful tips: • To achieve the best results when pureeing solid ingredients, place small portions into the glass jar one by one instead of placing a large quantity all at once. • If you are processing solid ingredients, cut them into small pieces (2-3cm) first. • When mixing solid ingredients start off first with a small amount of liquid. Gradually add more and more liquid through the opening in the lid. • Always place your hand on top of the blender when you are operating the device. • For stirring solid or very thick liquid ingred...

Download now

Please, enter two numbers from picture: