Votes - 3, Average rating: 4.3 ( )

Manafacture: Braun File size: 94 kb File name: 8136326e-73a1-4e63-8af6-83bdf2709ff7.pdf Language of manual:

...... ........ ...... ........ English Our products are engineered to meet the highest standards of quality, functionality and design. We hope you thoroughly enjoy your new Braun appliance. Caution Read all instructions carefully before using this product. • This appliance was constructed to process normal household quantities. • Please remember to keep your Braun handmixer out of the reach of children. • Before operating, check whether your voltage corresponds to the voltage printed on the top of the unit. • Only with the models M 870, 880 and M 880 M: The blade inserts are very sharp! Do not reach into or underneath the blades. • Braun electric appliances meet applicable safety standards. • This appliance can only be opened by an authorised Braun Service Centre for repairs. • The cord of this appliance may only be replaced by an authorised Braun Service Centre since special tools are required. • Faulty, unqualified repair work may cause accidents or injury to the user. ...... .. For UK only: IMPORTANT Your appliance is already fitted with a plug incorporating a 3 A fuse. If it does not fit your socket the plug should be cut off from the mains lead and an appropriate plug fitted. Throw away the cut off plug; do not insert it in a 13 A socket elsewhere in the house as this could cause a shock hazard. IMPORTANT – Fitting a Different Plug: The wires in the mains lead are coloured in accordance with the following code: Blue – Neutral Brown – Live If the colours of the wires in the mains lead do not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The blue wire must be connected to the terminal marked with the letter N or coloured black. The brown wire must be connected to the terminal marked with the letter L or coloured red. Never connect the blue or brown wire to the earth pin (E), when using a three pin plug. The appliance must be protected by a 3 amp fuse if a 13A (BS 1363) plug is used. The fuse cover must be refitted when changing the fuse. If the fuse cover is lost do not use the plug until a replacement cover has been fitted. These parts are available from authorised Braun Service Dealers. Never use the plug without fuse cover fitted. Description All models: Motor part Opening for the handblender attachment P % Cover for the opening .. Opening marked with a hexagon Opening marked with a circle Ejection key for the dough hooks .. / .. , the whisks .. / .. and the chopper attachment CA-M Switch Locking flap-up spout for winding up the cord around the motor part (g) Anti-skid base ring Dough hook with hexagonal plate M Dough hook with round plate N Whisk with round plate O Whisk with hexagonal plate With the models M 820, M 830, M 870, M 880 and M 880 M only: P Handblender attachment Q Mark for maximum immersion of the handblender attachment P With the models M 830, M 880 and M 880 M only: R Mixing/measuring beaker with air-tight lid (to be used only with the hand-blender attachment .. ) With the models M 810, M 830, M 880 and M 880 M only: S Wall holder With the models M 870, M 880 and M 880 M only: Chopper attachment CA-M .. - W T Upper part U Blade insert V Chopper bowl with modell indenti fication on the bowl (CA) W Anti-skid double function base/lid Notice: All models can be extended by the handblender attachment .. and the chopper attachment CA-M .. - .. and HC-M (without illustration), if these attachments are not standard your model. Specifications Voltage/wattage: motor part .. . 4 Automatic shut-off If the appliance is overloaded, e. g. if the motor is blocked, the motor part may be automatically switched off. If this is the case, light vibrations may be observed. The inserts stop rotating or rotate only very slowly. Turn the switch off, so that the motor can cool off. After a cooling off period of at least 10 minutes it can be switched on again. Switch Switch position: P = «pulse» (speed corresponds to setting «3» 0 = Off 1 = Low speed 2 = Medium speed 3 = High speed Assembling/disassembling Important: Always set the switch to position «0» and plug the appliance before assembling or disassembling the appliance, in order to avoid accientally switching on the appliance when inserting the two dough hooks or two whisks. For inserting the dough hooks and whisks correctly, see illustrations (a) and (b). Once inserted, the dough hooks or whisks can only be ejected by pressing the ejection key (c). However, for safety reasons this is only possible when the handmixer is switched off. How to use the handmixer Dough hooks .. / M For kneading yeast dough, pasta dough, pastries, as well as for mixing heavy minced meat doughs. Generally all speed settings may be used. The speed settings are recomm...

Download now

Please, enter two numbers from picture: