Votes - 3, Average rating: 4
(
)
)
|
manual abstract
To get the best results from your new citrus press it is advisable to read these instructions carefully before using the appliance. This is the only way to ensure optimum results and maximum safety. Using for the first time • Before use, check that the appliance has not been damaged during transport. • Remove all packaging from the citrus press. • Check that the voltage of the electrical socket corresponds to the voltage indicated on the label on the appliance. Before using the appliance for the first time, carefully wash and dry the fruit dome, filter, container and non-drip spout Assembling the appliance Assemble the appliance as follows: 1. Insert the two ends of the juicing lever into the guides (fig. 1). 2. Make sure the juicing lever is mounted correctly by raising and lowering the lever. 3. Insert the cover into the lever ring and push as far as it will go, making sure the tab on the ring fits into the hole in the cover (fig. 2). At this point, the appliance is ready for juicing. Before use Before using the machine for the first time, wash all the accessories (dust cover, fruit dome, top filter, bottom filter, pulp density selector, internal juice container, non-drip spout) in warm soapy water and rinse. Use •Place the container on the motor base. • Fit the bottom filter and top filter. • Place the filter assembly on the motor base , making sure the pulp density selector is positioned in the hollow in the motor base (fig. 3). • Fit the fruit dome onto the motor shaft. • Place a glass under the non-drip spout and move the spout downwards (fig. 4). • Plug into the mains. • Cut the citrus fruit in half. • Place half a fruit onto the fruit dome and lower the cover by pushing the juicing lever down and pressing lightly. The motor is designed to rotate in either direction to optimise the juicing effect; press the juicing lever intermittently the motor will reverse its rotational direction. fig.1 fig.2 Fig.3 Fig.4 3 Citrus juicer KS3000 Fig.5 Fig.6 NB: the pulp density selector enables the quantity of pulp in the juice to be regulated by making the holes in the filter smaller or larger. To reduce the amount of pulp, move the juice density selector left as far as it will go.To increase the quantity of pulp,move the selector to the opposite side (fig. 5). Important: never use the appliance continuously for more than four minutes. • When you have finished juicing, to reduce drips, move the non- drip spout to the raised position (fig. 6). Cleaning and maintenance • This appliance should not require any maintenance. However, before attempting to clean the appliance, unplug from the mains socket. • Remove the filters, dome and juice container by pulling upwards. • Remove all waste and clean the components. • To avoid residues drying on, take the appliance to pieces and clean the components immediately after use. • Wash the juice container, filters, cone and cover in warm water and detergent. None of the components can be washed in a dishwasher. • Clean the motor base with a damp cloth. NB: to facilitate cleaning, the non-drip spout can be removed from the container by rotating the spout outwords and pulling lightly; then replace. Safety Warnings Please read these instructions before operating and retain for future reference. • After having removed the appliance from the packaging, make sure that it has all of its components. If there is any doubt, do not use the appliance and return it to be checked by qualified personnel. • The plastic bag containing the appliance should be kept away from children as it may represent a suffocation hazard. • In the case that the plug is not compatible with the electrical outlet being used, have it substituted with a suitable one by qualified personnel. The use of adapters, multi-way plugs, and/or extension cords is not recommended. Whenever their use might become necessary, use simple or multiple adapters and/or extension cords conforming to the safety laws, taking care to not exceed the power limits marked on the adapter or the extension cord. • Should the appliance stop working, go to an authorised service centre. Citrus juicer KS3000 4 • The appliance should be destined exclusively to the use for which it has been created. Any other use is to be considered inappropriate and therefore dangerous. The manufacturer cannot be held responsible for any damage caused by improper, erroneous or irresponsible use and/or by repairs made by unqualified personnel. • Do not touch the appliance with wet or damp hands. • Do not use the appliance with bare or wet feet. • Do not unplug the appliance by pulling the plug out of the socket by the cord. • Do not the leave the appliance exposed to the atmosphere (rain, sun, freezing temperatures, etc.) • Children or infirm persons should not be allowed to use this product unsupervised • Remove the plug from the electrical socket when the appliance is not in use. • Do not immerse the appliance in water. • Before beginning any cleaning or maintenance p...