Votes - 2, Average rating: 4
(
)
)
|
manual abstract
Use the headset to talk hands-free on your iPhone. Follow these instructions to get started. Pair the Headset with iPhone 1 Connect the included iPhone Dual Dock to a USB 2.0 port on your computer (not on the keyboard). 2 Connect iPhone and the headset to the dock. The headset pairs with iPhone automatically. Dock The first time you connect the headset, let it charge for about an hour until the status light on the headset turns from amber to green. 3 Remove iPhone and the headset from the dock. Then press the button on the top of the headset so that calls will be routed through the headset. You can also pair the headset with iPhone and charge the headset using the included iPhone Travel Cable. Connect the cable to your computer, then connect the headset and iPhone to the cable. Cable Make or Answer a Call 1 Place the headset in either ear with the microphone pointed towards your mouth. Microphone Note: Placing the included foam pad over the speaker may provide a more comfortable fit. 2 Make a call on iPhone, or press the button on top of the headset to answer an incoming call. Button Status light If you answer an incoming call by tapping the iPhone touchscreen, audio is routed through iPhone. 3 When you finish, press the button to end the call. Adjust the Volume m Use the volume buttons on the side of iPhone. WARNING: For important safety information about avoiding hearing loss, see page 13. What Else You Can Do To Do this Answer incoming call Press button. End current call Press button. Decline incoming call Press button for about one second, until you hear a beep. Switch to incoming or Press button. on-hold call and put current call on hold Switch to incoming or Press button for about one on-hold call and end second, until you hear a current call beep. Check whether headset is turned on Press button. If headset is on, status light blinks green and headset beeps. Turn headset on Press and hold button for about three seconds, until you see the status light blink green or hear four rising tones. Turn headset o. Press and hold button for about four seconds, until you see the status light blink amber or hear four falling tones. Switch from the Headset to iPhone To stop using the headset and hear calls through iPhone instead, you can either: m Turn the headset o.. You can turn it on at any time to use it with iPhone again. m During a call, tap Audio Source on iPhone and choose iPhone or Speaker (for speakerphone). Reconnect the Headset to iPhone You can tell that calls will be routed through the headset if the Bluetooth icon (.) in the iPhone status bar is blue or white (depending on which application you’re using). If the headset gets disconnected from iPhone, two low beeps sound from the headset. You can tell that the headset is disconnected from iPhone if the Bluetooth icon in the status bar is gray or isn’t present. To route calls through the headset: m Press the button to reinitiate a connection. m If that doesn’t work, make sure the headset is turned on, charged, and in range of iPhone (within about 30 feet). m If that doesn’t work, on iPhone make sure Bluetooth is turned on. From the Home screen, choose Settings > General > Bluetooth and turn Bluetooth on. m If that doesn’t work, pair the headset with iPhone again. See page 3. Charge the Headset When the headset doesn’t have much charge left, a long beep sounds every ten seconds. To charge the headset: 1 Connect the included cable or dock to your computer. Or connect it to the Apple USB Power Adapter that comes with iPhone and connect the adapter to a standard power outlet. 2 Connect the headset to the cable or dock. A fully depleted headset recharges in about an hour and a half. Status light amber = Charging Status light green = Completely charged 3 Remove the headset from the dock. Press the button to connect the headset to iPhone, so that calls are routed through the headset. To see how much charge is left: m Connect iPhone and the headset to the dock or cable. The iPhone screen shows the headset’s battery level. The headset contains an internal, non-user-replaceable battery. Rechargeable batteries have a limited number of charge cycles and eventually will wear out. Battery life and number of charge cycles vary by use and settings. For more information, go to For more information about disposal of the headset, see page 17. WARNING: For important safety information about charging the headset, see page 13. Use the Headset with Another Phone or Device You can use the headset with some other Bluetooth devices, such as another phone. And you can pair the headset to iPhone manually, if you don’t have the cable or dock handy. You can also pair the headset with some Bluetooth enabled computers and talk to friends using an audio- enabled instant messaging application like iChat. To set the headset to be discoverable, so the other device can sense it: 1 Turn the headset o.. 2 Press and hold the headset button for about eight seconds, un...